Grain size and its distribution in NiTi thin films sputter-deposited on heated substrates

被引:0
|
作者
Li, YH [1 ]
Meng, FL
Qiu, DL
Wang, Y
Zheng, WT
Wang, YM
机构
[1] Jilin Univ, Coll Mat Sci & Engn, Dept Mat Sci, Changchun 130023, Peoples R China
[2] NW Univ Qinghuangdao, Div Basic Courses, Qinghuangdao 066004, Peoples R China
[3] Jilin Univ, Coll Chem, Key Lab Supramol Struct & Mat, Changchun 130023, Peoples R China
来源
CHINESE PHYSICS | 2004年 / 13卷 / 08期
关键词
NiTi thin film; substrate temperature; crystalline particle size;
D O I
暂无
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
Grain size and its distribution in NiTi thin films sputter-deposited on a heated substrate have been investigated using the small angle x-ray scattering technique. The crystalline particles have a small size and are distributed over a small range of sizes for the films grown at substrate temperatures 370 and 420degrees C. The results show that the sizes of crystalline particles are about the same. From the x-ray diffraction profiles, the sizes of crystalline particles obtained were 2.40nm and 2.81nm at substrate temperatures of 350 and 420degrees C, respectively. The morphology of NiTi thin films deposited at different substrate temperatures has been studied by atomic force microscopy. The root mean square roughness calculated for the film deposited at ambient temperature and 420degrees C are 1.42 and 2.75nm, respectively.
引用
收藏
页码:1315 / 1319
页数:5
相关论文
共 50 条
  • [1] Influence of polyimide substrates on the composition, morphology, and crystalline nature of sputter-deposited NiTi thin films
    Charleston, Jonathan
    Agrawal, Arpit
    Zhao, Yao
    Mirzaeifar, Reza
    SENSORS AND ACTUATORS A-PHYSICAL, 2023, 357
  • [2] Surface configurations during annealing of sputter-deposited NiTi thin films
    Gong, FF
    Jiang, EY
    Shen, HM
    Wang, YN
    CHINESE SCIENCE BULLETIN, 1997, 42 (23): : 2019 - 2020
  • [3] Surface configurations during annealing of sputter-deposited NiTi thin films
    GONG Fengfei
    The National Laboratory of Solid State Microstructures
    Center for Advanced Studies in Science and Technology of Microstructures
    2. Department of Physics
    3. National Laboratory of Solid State Microstructures
    Chinese Science Bulletin, 1997, (23) : 2019 - 2020
  • [4] Effect of Ar pressure on grain size of magnetron sputter-deposited Cu thin films
    Chan, K. Y.
    Teo, B. S.
    IET SCIENCE MEASUREMENT & TECHNOLOGY, 2007, 1 (02) : 87 - 90
  • [5] Characteristics of sputter-deposited Ru thin films on Si substrates
    Lee, HY
    Hsieh, YW
    Hsu, CH
    Liang, KS
    MATERIALS CHEMISTRY AND PHYSICS, 2003, 82 (03) : 984 - 990
  • [6] Compositional uniformity in sputter-deposited NiTi shape memory alloy thin films
    Mohanchandra, K. P.
    Ho, Ken K.
    Carman, Greg P.
    MATERIALS LETTERS, 2008, 62 (20) : 3481 - 3483
  • [7] TRIBOLOGICAL PROPERTIES OF THIN SILVER FILMS SPUTTER-DEPOSITED ON SUPERALLOY SUBSTRATES
    MARECHAL, N
    QUESNEL, E
    JULIET, P
    PAULEAU, Y
    ZIMMERMANN, C
    THIN SOLID FILMS, 1994, 249 (01) : 70 - 77
  • [8] TRANSFORMATIONS IN SPUTTER-DEPOSITED THIN-FILMS OF NITI SHAPE-MEMORY ALLOY
    YANG, YQ
    JIA, HS
    ZHANG, ZF
    SHEN, HM
    HU, A
    WANG, YN
    MATERIALS LETTERS, 1995, 22 (3-4) : 137 - 140
  • [9] Substrate-induced stress and the transformation behavior of sputter-deposited NiTi thin films
    Huang, X
    Liu, Y
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 352 (1-2): : 314 - 317
  • [10] Grain size and strain in thin sputter-deposited Ni0.8Fe0.2 and Cu films
    Neerinck, DG
    DeVeirman, AEM
    Slangen, MHJ
    Rijks, TGSM
    Kools, JCS
    THIN SOLID FILMS, 1996, 280 (1-2) : 136 - 141