Deformations and stresses in pin-loaded tubes under axial tension

被引：3
作者：
Ahmad, I
Stanley, P
机构：
[1] Univ Manchester, Sch Engn, Manchester M13 9PL, Lancs, England
[2] Pakistan Inst Engn & Appl Sci, Islamabad, Pakistan
来源：
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN | 2000年 / 35卷 / 05期
关键词：
pin-loaded tubes; deformations; stress concentrations; photoelastic stress analysis;
D O I：
10.1243/0309324001514116
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The results of an experimental study of the deformations and stresses developed in a series of pin-loaded cylindrical tubes subjected to an axial tensile load are presented and discussed. The effects of variations in the pin/tube diameter ratio and the position of the pin axis relative to the tube end are established for a particular tube thickness/diameter ratio (0.08), and the effects of variations in this ratio are described for two particular pin-tube configurations. The work also includes an assessment of the effects of lubrication at the pin-tube interfaces, pin clearance in the pin-holes, pin stiffness and restraint of radial deformations in the tube.
引用
收藏
页码：329 / 345
页数：17
相关论文
共 10 条
[1]  
AHMAD I, 1994, RECENT ADVANCES IN EXPERIMENTAL MECHANICS, VOLS 1 AND 2, P137
[2]   STRESSES ROUND PINS IN HOLES [J].
COX, HL ;
BROWN, AFC .
AERONAUTICAL QUARTERLY, 1964, 15 (04) :357-&
[3]  
FROCHT MM, 1940, J APPL MECH, V7, P5
[4]   A parametric study of the elastic stress distribution in pin-loaded tubes [J].
Grant, RJ ;
Smart, J .
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1997, 32 (03) :213-228
[5]   THE INFLUENCE OF THE COEFFICIENT OF FRICTION ON THE ELASTIC STRESS CONCENTRATION FACTOR FOR A PIN-JOINTED CONNECTION [J].
LAMBERT, TH ;
BRAILEY, RJ .
AERONAUTICAL QUARTERLY, 1962, 13 (01) :17-29
[6]   ELASTIC ANALYSIS OF PIN JOINTS IN PLATES UNDER SOME COMBINED PIN AND PLATE LOADS [J].
MANGALGIRI, PD ;
RAMAMURTHY, TS ;
DATTAGURU, B ;
RAO, AK .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1987, 29 (08) :577-585
[7]  
MEEK RMG, 1967, 311 NAT ENG LAB
[8]  
Stanley P, 1998, EXPERIMENTAL MECHANICS, VOLS 1 AND 2, P89
[9]  
Theocaris P., 1956, T ASME J APPL MECH, V23, P85
[10]   A STUDY OF THE STRESS-DISTRIBUTION IN A LUG LOADED BY A FREE FITTING PIN [J].
WEARING, JL ;
ARNELL, PP ;
PATTERSON, C .
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1985, 20 (04) :217-224
1