Forward kinematic problem of three 4-DOF parallel mechanisms (4-PRUR1, 4-PRUR2 and 4-PUU) with identical limb structures performing 3T1R motion pattern

被引:0
作者
Varshovi-Jaghargh, P. [1 ]
Naderi, D. [1 ]
Tale-Masouleh, M. [2 ]
机构
[1] Bu Ali Sina Univ, Dept Mech Engn, Hamadan, Iran
[2] Univ Tehran, Dept Mechatron, Human & Robot Interact Lab, Fac New Sci & Technol, Tehran, Iran
关键词
Parallel mechanism; 3T1R motion pattern; Schonflies motion; Forward kinematic problem; Three-dimensional Euclidean space; MANIPULATORS; ARCHITECTURES; 3T2R;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper investigates the forward kinematic problem of three 4-DOF parallel mechanisms performing three translations and one rotation motion, referred to as Schonflies motion. The kinematic arrangements of the mechanisms under study in this paper are such that two of them are classified as 4-PRUR and one of them is a 4-PUU. They are, respectively, special cases of 4-PR'R'R '' R '', 4-PR '' R '' R'R' and 4-PR '' R'R'R '' parallel mechanisms that have originated from the type synthesis of 4-DOF parallel mechanisms with identical limb structures. The forward kinematic problem is studied in three-dimensional Euclidean space, and a univariate expression describing the forward kinematic problem is obtained for each of the latter parallel mechanisms by the resultant method. The results obtained from this method show that a set of univariate expressions of degree (72, 64, 64, 8(2), 4, 2(8)) describes the forward kinematic problem of 4-PRUR1 and 4-PRUR2 parallel mechanisms. Also, a quadratic univariate expression represents the forward kinematic problem of 4-PUU parallel mechanisms. In addition, the system of equations corresponding to the forward kinematic problem is solved upon resorting to a homotopy continuation approach, which clarifies that the forward kinematic problems of 4-PRUR1, 4-PRUR2 and 4-PUU parallel mechanisms admit up to 230, 236 and 2 finite solutions, real and complex. (C) 2014 Sharif University of Technology. All rights reserved.
引用
收藏
页码:1671 / 1682
页数:12
相关论文
共 54 条
  • [1] FABRICATION AND ANALYSIS OF A NOVEL 3 DOF PARALLEL WRIST MECHANISM
    AGRAWAL, SK
    DESMIER, G
    LI, SY
    [J]. JOURNAL OF MECHANICAL DESIGN, 1995, 117 (02) : 343 - 345
  • [2] THE NIST ROBOCRANE
    ALBUS, J
    BOSTELMAN, R
    DAGALAKIS, N
    [J]. JOURNAL OF ROBOTIC SYSTEMS, 1993, 10 (05): : 709 - 724
  • [3] [Anonymous], 2005, GRADUATE TEXTS MATH
  • [4] Arai T., 1991, 91 ICAR. Fifth International Conference on Advanced Robotics. Robots in Unstructured Environments (Cat. No.91TH0376-4), P839, DOI 10.1109/ICAR.1991.240570
  • [5] Bates D., 2006, BERTINI SOFTWARE NUM
  • [6] Brandt G, 1999, IEEE Trans Inf Technol Biomed, V3, P252, DOI 10.1109/4233.809169
  • [7] Pantopteron-4: A new 3T1R decoupled parallel manipulator for pick-and-place applications
    Briot, Sebastien
    Bonev, Ilian A.
    [J]. MECHANISM AND MACHINE THEORY, 2010, 45 (05) : 707 - 721
  • [8] Clavel R., 1988, Proceedings of the 18th International Symposium on Industrial Robots, P91
  • [9] CLEARY K, 1993, PROCEEDINGS : IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, P708, DOI 10.1109/ROBOT.1993.292061
  • [10] Company O., 1999, ICAR 99 TOK JAP