TRIBOLOGICAL PROPERTIES OF STEEL/TiB2 COMPOSITES PREPARED BY SPARK PLASMA SINTERING

被引:16
|
作者
Sulima, I. [1 ]
机构
[1] Pedag Univ Cracow, Inst Technol, PL-30084 Krakow, Poland
关键词
ball-on-disc method; friction coefficient; wear rate; composites; Spark Plasma Sintering (SPS); WEAR BEHAVIOR; TIB2; MICROSTRUCTURE; RESISTANCE; PARTICLES;
D O I
10.2478/amm-2014-0216
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The mechanical and tribological properties of sintered 316L stainless steel composites with TiB2 submicroparticles were investigated. The composites were manufactured by Spark Plasma Sintering (SPS). The wear behaviour was studied by using a ball-on-disc wear tester at room temperature. The worn surface were analysed using Scanning Electron Microscopy (SEM). The results indicated that the friction coefficient and the wear resistance of composites with the same content of TiB2 particles depend on the sintering conditions.
引用
收藏
页码:1263 / 1268
页数:6
相关论文
共 50 条
  • [21] Spark plasma sintering of TiN-TiB2-hBN composites and their properties
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    CERAMICS INTERNATIONAL, 2015, 41 (03) : 4498 - 4503
  • [22] Microstructure and Properties of TiB2 Composites Produced by Spark Plasma Sintering with the Addition of Ti5Si3
    Twardowska, Agnieszka
    Podsiadlo, Marcin
    Sulima, Iwona
    Bryla, Krzysztof
    Hyjek, Pawel
    MATERIALS, 2021, 14 (14)
  • [23] Microwave sintering and properties of AlN/TiB2 composites
    Xu, GF
    Carmel, Y
    Olorunyolemi, T
    Lloyd, IK
    Wilson, OC
    JOURNAL OF MATERIALS RESEARCH, 2003, 18 (01) : 66 - 76
  • [24] Microwave sintering and properties of AlN/TiB2 composites
    Geng-fu Xu
    Yuval Carmel
    Tayo Olorunyolemi
    Isabel K. Lloyd
    Otto C. Wilson
    Journal of Materials Research, 2003, 18 : 66 - 76
  • [25] Effect of TiB2 on the Phase Composition, Microstructure, and Tribological Properties of AlCoCrFeNi/TiB2 Composites
    Kang, J. G.
    Yang, B. T.
    Wei, J. C.
    POWDER METALLURGY AND METAL CERAMICS, 2021, 59 (9-10) : 537 - 545
  • [26] Effect of TiB2 on the Phase Composition, Microstructure, and Tribological Properties of AlCoCrFeNi/TiB2 Composites
    J. G. Kang
    B. T. Yang
    J. C. Wei
    Powder Metallurgy and Metal Ceramics, 2021, 59 : 537 - 545
  • [27] Influence of ball milling on spark plasma sintering TiB2 ceramic
    Zhang, Dongming
    Fu, Zhengyi
    Tang, Tian
    Pang, Tingting
    Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology, 2002, 24 (05):
  • [28] Tribological properties of TiB2 and TiB2-MoSi2 ceramic composites
    Murthy, TSRC
    Basu, B
    Srivastava, A
    Balasubramaniam, R
    Suri, AK
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (07) : 1293 - 1300
  • [29] Spark plasma sintering of TiN-TiB2 composites
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (02) : 197 - 203
  • [30] Mechanical properties and microstructure of Al/(TiC + TiB2) composite fabricated by spark plasma sintering
    Hadian, M.
    Shahrajabian, H.
    Rafiei, M.
    CERAMICS INTERNATIONAL, 2019, 45 (09) : 12088 - 12092