TRIBOLOGICAL PROPERTIES OF STEEL/TiB2 COMPOSITES PREPARED BY SPARK PLASMA SINTERING

被引：16

作者：

Sulima, I. ^{[1
]}

机构：

[1] Pedag Univ Cracow, Inst Technol, PL-30084 Krakow, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2014年 / 59卷 / 04期

关键词：

ball-on-disc method; friction coefficient; wear rate; composites; Spark Plasma Sintering (SPS); WEAR BEHAVIOR; TIB2; MICROSTRUCTURE; RESISTANCE; PARTICLES;

D O I：

10.2478/amm-2014-0216

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The mechanical and tribological properties of sintered 316L stainless steel composites with TiB2 submicroparticles were investigated. The composites were manufactured by Spark Plasma Sintering (SPS). The wear behaviour was studied by using a ball-on-disc wear tester at room temperature. The worn surface were analysed using Scanning Electron Microscopy (SEM). The results indicated that the friction coefficient and the wear resistance of composites with the same content of TiB2 particles depend on the sintering conditions.

引用

页码：1263 / 1268

页数：6

共 22 条

[1] Microstructure evolution and wear properties of in situ synthesized TiB2 and TiC reinforced steel matrix composites [J].

Akhtar, Farid .

JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 459 (1-2) :491-497

[2]

Alexander William, 2001, CRC MAT SCI ENG HDB, P509

[3]

[Anonymous], 208082004E ISO

[4]

[Anonymous], 2011, J. Achievements Mater. Manuf. Eng

[5] Processing and properties of monolithic TiB2 based materials [J].

Basu, B. ;

Raju, G. B. ;

Suri, A. K. .

INTERNATIONAL MATERIALS REVIEWS, 2006, 51 (06) :352-374

[6]

Cutler R., 1995, ENG MAT HDB CERAMIC, V4, P787

[7] Tribological evaluation of Fe-B-TiB2 metal matrix composites [J].

Darabara, M. ;

Papadimitriou, G. D. ;

Bourithis, L. .

SURFACE & COATINGS TECHNOLOGY, 2007, 202 (02) :246-253

[8]

Fras E, 2004, ARCH METALL MATER, V49, P113

[9] Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites [J].

Kumar, S. ;

Chakraborty, M. ;

Sarma, V. Subramanya ;

Murty, B. S. .

WEAR, 2008, 265 (1-2) :134-142

[10] Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering [J].

Lin, Shaojiang ;

Xiong, Weihao .

ADVANCED POWDER TECHNOLOGY, 2012, 23 (03) :419-425

← 1 2 3 →