Effect of MWCNTs addition on the wear and compressive deformation behavior of LM13-SiC-MWCNTs hybrid composites

被引：29
|
作者：
Yadav, B. N. [1 ,2 ]
Verma, Gaurav [3 ]
Muchhala, Dilip [1 ,2 ]
Kumar, Rajeev [1 ,2 ]
Mondal, D. P. [1 ,2 ]
机构：
[1] Acad Sci & Innovat Res AcSIR, New Delhi, India
[2] CSIR Adv Mat & Proc Res Inst, Bhopal 462026, India
[3] Barkatullah Univ, Univ Inst Technol, Bhopal 462026, India
来源：
TRIBOLOGY INTERNATIONAL | 2018年 / 128卷
关键词：
MWCNT; Hybrid composite; Wear behavior; Subsurface; METAL-MATRIX COMPOSITES; CARBON NANOTUBES; TRIBOLOGICAL PROPERTIES; MECHANICAL-PROPERTIES; AL COMPOSITES; SIC PARTICLES; NANOPARTICLES; FABRICATION; FRICTION; MICROSTRUCTURE;
D O I：
10.1016/j.triboint.2018.07.013
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Aluminium-SiC-MWCNTs nano-hybrid composites (HCs) were prepared through stir casting technique. The wear rate, coefficient of friction and compressive strength of HCs increase with increasing MWCNTs (multiwalled carbon nanotubes) concentration in aluminum SiC comopsites. But when only MWCNTs are used as reinforcement its strength, wear rate and microhardness values are found to be significantly less than other studied composite materials. Therefore, SiC is used as a secondary reinforcement to enhance the interfacial interaction between MWCNTs and Aluminium. This interaction improved strengthening of matrix due to uniform dispersion of MWCNTs and high mechanical strength of SiC and MWCNTs. When MWCNTs are used separately as reinforcement, it got agglomerated and thus the strength and wear resistance of composite decreased.
引用
收藏
页码：21 / 33
页数：13
相关论文
共 50 条
  • [1] Nanoindentation and wear behaviour of copper based hybrid composites reinforced with SiC and MWCNTs synthesized by spark plasma sintering
    Mallikarjuna, H. M.
    Ramesh, C. S.
    Koppad, P. G.
    Keshavamurthy, R.
    Sethuram, D.
    VACUUM, 2017, 145 : 320 - 333
  • [2] Compressive Deformation Behavior of Al-SiC-MWCNTs Hybrid Composite Foam Through Factorial Design of Experiments
    Yadav, B. N.
    Muchhala, Dilip
    Singh, Pradeep
    Gupta, Gaurav
    Venkat, A. N. Ch.
    Mondal, D. P.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (01) : 223 - 234
  • [3] Compressive Deformation Behavior of Al–SiC–MWCNTs Hybrid Composite Foam Through Factorial Design of Experiments
    B. N. Yadav
    Dilip Muchhala
    Pradeep Singh
    Gaurav Gupta
    A. N. Ch. Venkat
    D. P. Mondal
    Transactions of the Indian Institute of Metals, 2020, 73 : 223 - 234
  • [4] Optimized ball milling and sequential addition of SiC and MWCNTs reinforcements for enhanced performance of copper hybrid composites
    Ahmadian, Hossein
    Thou, Tianfeng
    Sadoun, A. M.
    Kumar, A. Senthil
    Fathy, A.
    Qian, Yu
    Guo, Weijia
    Wagih, A.
    RESULTS IN ENGINEERING, 2024, 24
  • [5] Effect of MWCNTs on Wear Behavior of Epoxy Resin for Aircraft Applications
    Mucha, Mateusz
    Krzyzak, Aneta
    Kosicka, Ewelina
    Coy, Emerson
    Koscinski, Mikolaj
    Sterzynski, Tomasz
    Salacinski, Michal
    MATERIALS, 2020, 13 (12)
  • [6] The effect of SiC nanoparticles and sintering temperature on the structural and wear properties of Cu-MWCNTs-SiC hybrid nanocomposites
    Nabati, Maryam
    Abdoos, Hassan
    Semnani, Hamidreza Mohammadian
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021, 112 (01) : 25 - 34
  • [7] Synergic effect of MWCNTs and SiC addition on microstructure and mechanical properties of closed-cell Al-SiC-MWCNTs HCFs
    Yadav, B. N.
    Muchhala, Dilip
    Singh, Pradeep
    Venkat, A. N. Ch
    Mondal, D. P.
    COMPOSITES PART B-ENGINEERING, 2019, 172 : 458 - 471
  • [8] Effect of MWCNTs on Improvement of Fracture Toughness of Spark Plasma Sintered SiC Nano-Composites
    Thirugnanasabandam, Arunkumar
    Ramachandran, Karthikeyan
    Subramani, R. Ram
    Mariadas, Anish
    Jayaraman, J. Theerthagiri
    Boddula, Rajender
    Jagannathan, Madhavan
    CURRENT ANALYTICAL CHEMISTRY, 2021, 17 (06) : 849 - 856
  • [9] Friction and wear behavior of Al-SiC(n) hybrid composites with carbon addition
    Hekner, Bartosz
    Myalski, Jerzy
    Valle, Nathalie
    Botor-Probierz, Agnieszka
    Sopicka-Lizer, Malgorzata
    Wieczorek, Jakub
    COMPOSITES PART B-ENGINEERING, 2017, 108 : 291 - 300
  • [10] Effect of MWCNTs and heat treatment on coefficient of friction and wear characteristics of MWCNTs reinforced Al6082 composites under dry sliding condition
    Baghel, Madhusudan
    Krishna, Chimata Murali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (18) : 4295 - 4306
12345