Effects of mixing on the result of anaerobic digestion: Review

Mixing in an anaerobic digester keeps the solids in suspension and homogenizes the incoming feed with the active microbial community of the digester content. Experimental investigations have shown that the mixing mode and mixing intensity have direct effects on the biogas yield even though there are conflicting views on mixing design. This review analyzes and presents different methods to evaluate the mixing in a digester (chemical and radioactive tracers and laboratory analysis), tools for digester design (computational fluid dynamics and kinetic modeling) and current research on the effects of mixing on the anaerobic digestion process. Empirical data on experiments comparing different mixing regimes have been reviewed from both a technical and microbial standpoint with a focus both on full scale digesters and in lab-scale evaluations. Lower mixing intensity or uneven mixing in the anaerobic digestion process can be beneficial during the startup phase to allow for methanogenic biomass growth and alleviate process instability problems. Intermittent mixing has been shown to be able to yield a similar gas production as continuous mixing but with the possibility to reduce the maintenance and energy demands of the process. Problems,often experienced with experimental design include the effect of mixing on the solids retention time, and measurement of steady state gas production because of startup instabilities. Further research should be aimed at studying the effects of mixing on a chemical and microbial level and on the different stages of anaerobic digestion (hydrolysis, acidogenesis, acetogenesis and methanogenesis). The focus should be on the effects of mixing on a multiple stage digestion process and also finding new methods to evaluate the effects of mixing in the one stage digestion process rather than evaluating a wider range of mixing modes, intensities and substrates. (C) 2014 Elsevier Ltd. All rights reserved.