Numerical simulation of a coupling effect on electronic states in quantum dots

Lasers operating at 1.3 mu m have attracted considerable attention owing to their potential to provide efficient light sources for next-generation high-speed communication systems. InAs/GaAs quantum dots (QDs) were pointed out as a reliable low-cost way to attain this goal. However, due to the lattice mismatch, the accumulation of strain by stacking the QDs can cause dislocations that significantly degrade the performance of the lasers. In order to reduce this strain, a promising method is the use of InAs QDs embedded in InGaAs layers. The capping of the QD layer with InGaAs is able to tune the emission toward longer and controllable wave-lengths between 1.1 and 1.5 mu m. In this work, using the effective-mass envelope-function theory, we investigated theoretically the optical properties of coupled InAs/GaAs strained QDs based structures emitting around 1.33 mu m. The calculation was performed by the resolution of the 3D Schrodinger equation. The energy levels of confined carriers and the optical transition energy have been investigated. The oscillator strengths of this transition have been studied with and without taking into account the strain effect in the calculations. The information derived from the present study shows that the InGaAs capping layer may have profound consequences as regards the performance of an InAs/GaAs QD based laser. Based on the present results, we hope that the present work make a contribution to experimental studies of InAs/GaAs QD based structures, namely the optoelectronic applications concerning infrared and mid-infrared spectral regions as well as the solar cells. (c) 2010 Elsevier Ltd. All rights reserved.