Frictional Properties of α-Nucleated Polypropylene-Based Composites Filled with Wood Flour

被引：0

作者：

Mysiukiewicz, Olga ^{[1
]}

Jablonski, Piotr ^{[2
]}

Majchrowski, Radomir ^{[3
]}

Sledzik, Robert ^{[1
]}

Sterzynski, Tomasz ^{[1
]}

机构：

[1] Poznan Univ Tech, Inst Mat Technol, Fac Mech Engn & Management, Div Plast Proc, Poznan, Poland

[2] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Div Technol Planning, Poznan, Poland

[3] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Div Metrol & Measurement Syst, Poznan, Poland

来源：

ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING | 2019年

关键词：

Wood-polymer composites; Polypropylene; Friction; Wear; Surface topography; HIGH-DENSITY POLYETHYLENE; MECHANICAL-PROPERTIES; GREEN-COMPOSITES; WEAR; BEHAVIOR; TEREPHTHALATE; PERFORMANCE; TRIBOLOGY; POLYMERS; BETA;

D O I：

10.1007/978-3-030-16943-5_39

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Wood-polymer composites (WPCs) as eco-friendly materials characterized by advantageous properties are a popular alternative for conventional polymeric compositions. Even though they are widely popular and utilized in many branches of industry, some of their characteristic still remain obscure. The domain which demands better insight is tribology of wood-polymer composites. The aim of this paper was to describe the phenomena behind friction and wear of WPCs in reference to the surface topography. The object of this research were alpha-nucleated polypropylene-based composites filled with 0, 5, 10, 20 and 30 wt.% of wood flour. Hardness, coefficient of friction and changes of surface topography of the samples due to wear were evaluated. It was concluded that addition of the natural based filler causes an increase of the composite's coefficient of friction.

引用

页码：461 / 472

页数：12

共 44 条

[1] Polypropylene composites obtained from self-reinforced hybrid fiber system
Andrzejewski, Jacek
Tutak, Nicole
Szostak, Marek
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (15)
[2] Correlation between Frictional force, Interface Temperature and Specific Wear Rate of Fibre Polymer Composites
Arhaim, Y. H.
Shalwan, A.
Yousif, B. F.
[J]. ADVANCED MATERIALS RESEARCH III, 2013, 685 : 45 - 49
[3] Wood-plastic composites as promising green-composites for automotive industries!
Ashori, Alireza
[J]. BIORESOURCE TECHNOLOGY, 2008, 99 (11) : 4661 - 4667
[4] Effects of microstructure on wear behaviour of wood reinforced polypropylene composite
Aurrekoetxea, J.
Sarrionandia, M.
Gomez, X.
[J]. WEAR, 2008, 265 (5-6) : 606 - 611
[5] Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO2, ZnO, CuO and SiC
Bahadur, S
Sunkara, C
[J]. WEAR, 2005, 258 (09) : 1411 - 1421
[6] Bahadur S., 1999, WEAR, V2000, P92
[7] Frictional and adhesive wear performance of natural fibre reinforced polypropylene composites
Bajpai, Pramendra K.
Singh, Inderdeep
Madaan, Jitendra
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, 227 (J4) : 385 - 392
[8] Polyethylene green composites modified with post agricultural waste filler: thermo-mechanical and damping properties
Barczewski, Mateusz
Matykiewicz, Danuta
Piasecki, Adam
Szostak, Marek
[J]. COMPOSITE INTERFACES, 2018, 25 (04) : 287 - 299
[9] Influence of a Sorbitol-Based Nucleating Agent Modified with Silsesquioxanes on the Non-Isothermal Crystallization of Isotactic Polypropylene
Barczewski, Mateusz
Dobrzynska-Mizera, Monika
Dudziec, Beata
Sterzynski, Tomasz
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (08)
[10] Brostow W, 2010, J MATER EDUC, V32, P273

← 1 2 3 4 5 →