EFFECTS OF REUSING ABRASIVE MATERIAL IN ABRASIVE WATER JET CUTTING ON THE QUALITY OF PROCESSED SURFACES AND ENVIRONMENT

被引：1
|
作者：
Schnakovszky, Carol [1 ]
Herghelegiu, Eugen [1 ]
Radu, Maria Crina [1 ]
Zichil, Valentin [1 ]
机构：
[1] Vasile Alecsandri Univ Bacau, Fac Engn, Bacau 600115, Romania
来源：
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL | 2014年 / 13卷 / 07期
关键词：
environmental friendly technology; jet cutting; reused abrasive; surface quality;
D O I：
10.30638/eemj.2014.189
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The aim of the current study is to analyse the effects of reusing the abrasive material, in different rates, on the quality of surfaces processed by abrasive water jet cutting (AWJ) and to correlate it with the environmental impact. In view of this, two aluminium alloys are processed, Al 2024 T3 and Al 6065 T651, respectively, with large applicability in the aeronautic and machine building industries. It was found that for reusing rates of the abrasive material higher than 60%, a better quality of the processed surfaces in terms of the five analyzed parameters according to the ISO/WD/TC44 N 1770 standard resulted. Consequently, a lower amount of virgin abrasive material is necessary, which in turn leads to both, economic and environmental benefits.
引用
收藏
页码：1707 / 1712
页数：6
相关论文
共 50 条
  • [21] EVALUATION OF EROSION PERFORMANCE OF ABRASIVE PARTICLES IN ABRASIVE WATER JET CUTTING PROCESS
    Hlavacek, Petr
    Sitek, Libor
    Foldyna, Josef
    MM SCIENCE JOURNAL, 2020, 2020 : 3869 - 3872
  • [22] ON-LINE MONITORING OF TECHNOLOGICAL PROCESS OF MATERIAL ABRASIVE WATER JET CUTTING
    Kinik, Daniel
    Ganovska, Beaa
    Hloch, Sergej
    Monka, Peter
    Monkova, Katarina
    Hutyrova, Zuzana
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2015, 22 (02): : 351 - 357
  • [23] Technical Possibilities of Noise Reduction in Material Cutting by Abrasive Water-jet
    Radvanska, Agata
    Ergic, Todor
    Ivandic, Zeljko
    Hloch, Sergej
    Valicek, Jan
    Mullarova, Jana
    STROJARSTVO, 2009, 51 (04): : 347 - 354
  • [24] Rock cutting performance of abrasive water jet cutting systems
    Karakurt, I.
    Aydiner, K.
    TURKIYE 20. ULUSLARARASI MADENCILIK KONGRESI BILDIRILER KITABI, NO 132, 2007, : 127 - 134
  • [25] The optimal cutting times of multipass abrasive water jet cutting
    Xiaojin Miao
    Zhengrong Qiang
    Meiping Wu
    Lei Song
    Feng Ye
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 1779 - 1786
  • [26] The optimal cutting times of multipass abrasive water jet cutting
    Miao, Xiaojin
    Qiang, Zhengrong
    Wu, Meiping
    Song, Lei
    Ye, Feng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (5-8): : 1779 - 1786
  • [27] EFFECTS OF MIXING CHAMBER SHAPE ON CUTTING PERFORMANCE IN ABRASIVE WATER JET
    Lee, Hyo-Ryeol
    Cho, Yong-Sik
    Kim, Hwa-Young
    Ahn, Jung-Hwan
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 2134 - +
  • [28] Pulsating Abrasive Water Jet Cutting Using a Standard Abrasive Injection Cutting Head - Preliminary Tests
    Sitek, Libor
    Hlavacek, Petr
    Foldyna, Josef
    Jarchau, Michael
    Foldyna, Vladimir
    ADVANCES IN WATER JETTING, WATER JET 2019, 2021, : 186 - 196
  • [29] The effect of cutting jet variation on striation formation in abrasive water jet cutting
    Chen, FL
    Siores, E
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (10): : 1479 - 1486
  • [30] Artificial Intelligence Model for the Prediction of Cut Quality in Abrasive Water Jet Cutting
    Madic, Milos
    Jankovic, Predrag
    Slatineanu, Laurentiu
    Radovanovic, Miroslav
    ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, 2014, 657 : 206 - +
12345