The effect of nitride addition on the thermal stability of mechanically alloyed amorphous Zr65Al7.5CU17.5Ni10 alloy

被引:6
作者
Zhou, CR [1 ]
Lu, K [1 ]
Xu, J [1 ]
机构
[1] Chinese Acad Sci, State Key Lab Rapidly Solidified Non Equilibrium, Shenyang 110015, Peoples R China
来源
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2 | 2000年 / 343-3卷
关键词
crystallization; mechanical alloying; metallic glass; thermal stability;
D O I
10.4028/www.scientific.net/MSF.343-346.116
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The elemental powder mixtures with a composition of Zr65Al7.5Cu17.5Ni10 together with 10 vol.% UN, TiN and Si3N4 particles were mechanically alloyed to form the nitride/metallic glass composite. The effect of the added nitride particles on the thermal stability was analyzed using X-ray diffraction, transmission electron microscopy and differential scanning calorimetry (DSC). Milled to a steady state, initial particles of the nitride crystallite were refined to nano-scare and homogeneously dispersed in the amorphous Zr-based alloy matrix. Compared with the Zr-based metallic glass without nitride, the nitride-containing composites exhibit a similar large supercooled liquid region and the crystallization activation energy. At a heating rate of 40 K/min, there is no appreciable change in the glass transition temperature, but the onset temperature of the primary crystallization increases by about 10K. The nitride addition results in an extension about 10 K for the temperature interval (Delta T-x) between the T-g and the T-x.
引用
收藏
页码:116 / 122
页数:7
相关论文
共 50 条
[41]   Effect of pre-annealing on thermal stability of amorphous Zr-Cu-Ni alloy [J].
Liu, Y ;
Hui, XD ;
Wang, HR .
RARE METALS, 2003, 22 (04) :270-275
[42]   Effect of pre-annealing on thermal stability of amorphous Zr-Cu-Ni alloy [J].
LIU Yan HUI Xidong and WANG Huanrong Department of Materials Science and Engineering Shandong Institute of Architecture and Engineering Jinan China State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing Beijing China Key Laboratory of Liquid Structure and Heredity of Materials Ministry of Education Shandong University Jinan China .
RareMetals, 2003, (04) :270-275
[43]   Effect of Zr and Cu on Mechanical Properties, Glass Forming Ability and Thermal Stability of Zr63.68Cu16.2 Ni10.12 Al10 Amorphous Alloy [J].
Li, Chunyan ;
Yin, Jinfeng ;
Ding, Juanqiang ;
Zhu, Fuping ;
Zhao, Yanchun ;
Kou, Shengzhong .
ADVANCED FUNCTIONAL MATERIALS (CMC 2017), 2018, :225-238
[44]   Thermal stability of mechanically alloyed Zr-Cu-Al-Ni glass composites containing ZrC particles as a second phase [J].
Deledda, S ;
Eckert, J ;
Schultz, L .
SCRIPTA MATERIALIA, 2002, 46 (01) :31-35
[45]   Crystallization kinetics of the Zr61Al7.5Cu17.5Ni10Si4 alloy using isothermal DSC and TEM observation [J].
Jang, JSC ;
Tsao, SF ;
Chang, LJ ;
Chen, GJ ;
Huang, JC .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2006, 352 (01) :71-77
[46]   Preparation and thermal stability of Zr-Al-Ni-Cu-Nb bulk amorphous alloy matrix composites [J].
Huang Yongjiang ;
Sun Jianfei ;
Yan Xin ;
Shen Jun .
RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (03) :391-395
[47]   Thermal stability and crystallization of Zr-Al-Cu-Ni based amorphous alloy added with boron and silicon [J].
Jang, J. S. C. ;
Chang, L. J. ;
Hung, T. H. ;
Huang, J. C. ;
Liu, C. T. .
INTERMETALLICS, 2006, 14 (8-9) :951-956
[48]   Mechanically induced crystalline-glassy phase transformations of mechanically alloyed Ta55Zr10Al10Ni10Cu15 multicomponent alloy powders [J].
El-Eskandarany, MS ;
Zhang, W ;
Inoue, A .
JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 350 (1-2) :222-231
[49]   Thermal stability and consolidation behavior of mechanically alloyed Zr-Al-Cu-Ni powders with varying oxygen, iron and tungsten content [J].
Kubler, A ;
Eckert, J ;
Kirchner, A ;
Schultz, L .
MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 2, 1998, 269-2 :767-772
[50]   Effect of Simultaneous Replacement of Fe with Zr and Ni in a Mechanically Alloyed Multicomponent Fe-Based Amorphous Alloy [J].
Zahra Allafe Razzaghi ;
Abbas Kianvash ;
Abolfazl Tutunchi .
Journal of Electronic Materials, 2020, 49 :1189-1193