Dependence of the interlaminar fracture toughness of E-Glass/Polyester woven fabric composites laminates on ply orientation

Delamination is one of the most important defects in fiber reinforced composite laminates. This paper presents the delamination resistance of thick woven glass fiber reinforced polyester specimens and experimentally examines the effect of ply orientations in terms of the critical strain energy release rate. Specimens with different ply orientations (0 degrees , 30 degrees , 45 degrees and 70 degrees) are fabricated with plain woven (taffetas) fabrics. The tests used for the experiments are Double Cantilever Beam (DCB) for pure mode I, End Load Split (ELS) for pure mode II and Mixed Mode Flexure (MMF) for mixed mode I/II under static conditions. The experimental results have been expressed in terms of total strain energy release rate and R-curves. Results show that fiber bridging for woven fabrics occurred due to non-midplane crack propagation. The fracture toughness results show that the delamination resistance increase with ply angle until 45 degrees then it decrease. (C) 2016 Elsevier Ltd. All rights reserved.