The contribution of aluminides to strength of Al-Mg2Si-Cu-Ni alloys at room and elevated temperatures

被引：10
作者：
Sun, Yilin [1 ]
Li, Chong [1 ]
Liu, Yongchang [1 ]
Ding, Ran [1 ]
Liu, Xiangfa [2 ]
Kim, Su-Hyeon [3 ]
Yu, Liming [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydraul Engn Simulat & Safety, Tianjin 300350, Peoples R China
[2] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China
[3] Korea Inst Mat Sci, Dept Aluminum, Chang Won 51508, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2021年 / 817卷
基金：
中国国家自然科学基金;
关键词：
Al-Mg2Si alloys; Intermetallic phases; Microstructure; Mechanical properties; IN-SITU COMPOSITE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; PRIMARY MG2SI; NANOCRYSTALLINE MG2SI; INTERMETALLIC PHASES; MICROSTRUCTURE; EVOLUTION; NI; CU;
D O I：
10.1016/j.msea.2021.141381
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of the Ni/Cu-rich aluminides on the strength of Al-15%Mg2Si-Cu-Ni alloys at room and elevated temperatures was analyzed and revealed. The contribution of aluminides to alloys' strength is promoted with the temperature increasing from 25 degrees C to 350 degrees C. Both Mg2Si and aluminides strengthen Al matrix and carry the load at room temperature (25 degrees C). The thermal stable and interconnected aluminides play the leading role in loadcarrying and load-transfer capacity at high temperature (350 degrees C), resulting in the pronounced contribution to alloys' strength. At 450 degrees C, aluminides lose load-bearing capacity and have no effect on the increase of alloys' strength.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Fractal and Conventional Analysis of Cu Content Effect on the Microstructure of Al-Si-Cu-Mg Alloys
    Casas, Bertha Y.
    Carranza, Juan C.
    Figueroa, Ignacio A.
    Gonzalez, Jose G.
    Hernancdez, Orlando
    Bejar, Luis
    Aguilar, Claudio
    Alfonso, Ismeli
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2020, 23 (04):
  • [32] Influence of Mg and Cu on precipitation behaviors and mechanical properties of Al-Si alloys
    Xue, Li-Wen
    Jia, Hai-Long
    Ma, Pin-kui
    Song, Jia-Wang
    Zha, Min
    Wang, Hui-Yuan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 908
  • [33] Hardness - Yield Strength Relation of Al-Mg-Si Alloys
    Sekhar, Aluru Praveen
    Nandy, Supriya
    Ray, Kalyan Kumar
    Das, Debdulal
    7TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM 2017), 2018, 338
  • [34] Effect of Q-Al5Cu2Mg8Si6 phase on mechanical properties of Al-Si-Cu-Mg alloy at elevated temperature
    Zuo, Lijie
    Ye, Bing
    Feng, Jian
    Kong, Xiangyang
    Jiang, Haiyan
    Ding, Wenjiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 693 : 26 - 32
  • [35] Influence of Morphological Change of Eutectic Si during Homogenization Heat Treatment on the Microstructure and Strength at Elevated Temperatures in Wrought Al-Si-Cu-Mg-Ni Alloy
    Sugatani, Naoya
    Dohi, Masayoshi
    Tsuchiya, Taiki
    Lee, Seungwon
    Matsuda, Kenji
    MATERIALS TRANSACTIONS, 2024, 65 (02) : 229 - 236
  • [36] Superior strength-ductility synergy of Al-Si-Cu-Mg alloys achieved by regulating solute clusters and precipitates: Experimental validation and numerical simulation
    Xue, Li-Wen
    Jia, Hai-Long
    Wang, Jin-Kai
    Zha, Min
    Jin, Shen-Bao
    Wang, Hui-Yuan
    INTERNATIONAL JOURNAL OF PLASTICITY, 2025, 188
  • [37] Phase formation in as-solidified and heat-treated Al-Si-Cu-Mg-Ni alloys: Thermodynamic assessment and experimental investigation for alloy design
    Farkoosh, A. R.
    Javidani, M.
    Hoseini, M.
    Larouche, D.
    Pekguleryuz, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 551 : 596 - 606
  • [38] Strengthening precipitates and mechanical performance of Al-Si-Cu-Mg cast alloys containing transition elements
    Abdelaziz, M. H.
    Elgallad, E. M.
    Doty, H. W.
    Samuel, F. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 820
  • [39] Evolution of nickel-rich phases in Al-Si-Cu-Ni-Mg piston alloys with different Cu additions
    Yang, Yang
    Yu, Kuilong
    Li, Yunguo
    Zhao, Degang
    Liu, Xiangfa
    MATERIALS & DESIGN, 2012, 33 : 220 - 225
  • [40] The heat treatment of Al-Si-Cu-Mg casting alloys
    Sjolander, Emma
    Seifeddine, Salem
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (10) : 1249 - 1259
12345