The contribution of aluminides to strength of Al-Mg2Si-Cu-Ni alloys at room and elevated temperatures

被引：10
|
作者：
Sun, Yilin [1 ]
Li, Chong [1 ]
Liu, Yongchang [1 ]
Ding, Ran [1 ]
Liu, Xiangfa [2 ]
Kim, Su-Hyeon [3 ]
Yu, Liming [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydraul Engn Simulat & Safety, Tianjin 300350, Peoples R China
[2] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China
[3] Korea Inst Mat Sci, Dept Aluminum, Chang Won 51508, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2021年 / 817卷
基金：
中国国家自然科学基金;
关键词：
Al-Mg2Si alloys; Intermetallic phases; Microstructure; Mechanical properties; IN-SITU COMPOSITE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; PRIMARY MG2SI; NANOCRYSTALLINE MG2SI; INTERMETALLIC PHASES; MICROSTRUCTURE; EVOLUTION; NI; CU;
D O I：
10.1016/j.msea.2021.141381
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of the Ni/Cu-rich aluminides on the strength of Al-15%Mg2Si-Cu-Ni alloys at room and elevated temperatures was analyzed and revealed. The contribution of aluminides to alloys' strength is promoted with the temperature increasing from 25 degrees C to 350 degrees C. Both Mg2Si and aluminides strengthen Al matrix and carry the load at room temperature (25 degrees C). The thermal stable and interconnected aluminides play the leading role in loadcarrying and load-transfer capacity at high temperature (350 degrees C), resulting in the pronounced contribution to alloys' strength. At 450 degrees C, aluminides lose load-bearing capacity and have no effect on the increase of alloys' strength.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Effect of Intermetallics and Tramp Elements on Porosity Formation and Hardness of Al-Si-Mg and Al-Si-Cu-Mg Alloys
    Mohamed, A. M. A.
    Samuel, E.
    Samuel, A. M.
    Samuel, F. H.
    Songmene, V
    Doty, H. W.
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (02) : 664 - 681
  • [22] The strengthening role of micro-sized phases and nano-precipitates in Al-Mg2Si-Cu(-Ni) alloys at 25 °C and 350 °C
    Sun, Yilin
    Li, Chong
    Zhou, Zeyu
    An, Rujie
    Yu, Liming
    Liu, Yongchang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 2514 - 2521
  • [23] Effect of Mg/Si ratio on synergistic improvement of formability and yield strength in Al-Mg-Si-Zn alloys
    Liu, Xu
    Zhang, Shao-You
    Liu, Ze-Tian
    Wang, Hui-Yuan
    MATERIALS CHARACTERIZATION, 2024, 214
  • [24] Precipitation Hardening at Elevated Temperatures above 400 °C and Subsequent Natural Age Hardening of Commercial Al-Si-Cu Alloy
    Li, Ruoqi
    Takata, Naoki
    Suzuki, Asuka
    Kobashi, Makoto
    Okada, Yuji
    Furukawa, Yuichi
    MATERIALS, 2021, 14 (23)
  • [25] Effects of Sr content on the microstructure and mechanical properties of cast Al-12Si-4Cu-2Ni-0.8Mg alloys
    Sui, Yudong
    Wang, Qudong
    Wang, Guangliang
    Liu, Teng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 622 : 572 - 579
  • [26] Enhanced Strength and Toughness in Al-Mg-Si Alloys with Addition of Cr, Mn, and Cu Elements
    Lin, Sen
    Dang, Jian
    Wang, Zhongping
    Sun, Yuanwei
    Xiang, Yuhui
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (03) : 1039 - 1050
  • [27] Enhanced Strength and Toughness in Al-Mg-Si Alloys with Addition of Cr, Mn, and Cu Elements
    Sen Lin
    Jian Dang
    Zhongping Wang
    Yuanwei Sun
    Yuhui Xiang
    Journal of Materials Engineering and Performance, 2023, 32 : 1039 - 1050
  • [28] Preparation of a novel ultra-high strength Al-Si-Cu-Ni alloy at room/elevated temperature by squeeze casting combined with a new heat treatment process
    Lu, Shulin
    Li, Shilong
    Yan, Zhaoxiang
    Wu, Shusen
    Li, Jianyu
    Ji, Xiaoyuan
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2024, 34 (04) : 690 - 701
  • [29] Impact of intermetallic phases on the localised pitting corrosion and high-temperature tensile strength of Al-Si-Mg-Cu-Ni alloys
    Kayani, Saif Haider
    Ha, Heon-Young
    Kim, Byung-Joo
    Cho, Young-Hee
    Son, Hyeon-Woo
    Lee, Jung- Moo
    CORROSION SCIENCE, 2024, 233
  • [30] Improvement in as-cast strength of high pressure die-cast Al-Si-Cu-Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2Cu phases
    Zhu, Xiangzhen
    Dong, Xixi
    Blake, Paul
    Ji, Shouxun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
12345