The contribution of aluminides to strength of Al-Mg2Si-Cu-Ni alloys at room and elevated temperatures

被引：10
|
作者：
Sun, Yilin [1 ]
Li, Chong [1 ]
Liu, Yongchang [1 ]
Ding, Ran [1 ]
Liu, Xiangfa [2 ]
Kim, Su-Hyeon [3 ]
Yu, Liming [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydraul Engn Simulat & Safety, Tianjin 300350, Peoples R China
[2] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China
[3] Korea Inst Mat Sci, Dept Aluminum, Chang Won 51508, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2021年 / 817卷
基金：
中国国家自然科学基金;
关键词：
Al-Mg2Si alloys; Intermetallic phases; Microstructure; Mechanical properties; IN-SITU COMPOSITE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; PRIMARY MG2SI; NANOCRYSTALLINE MG2SI; INTERMETALLIC PHASES; MICROSTRUCTURE; EVOLUTION; NI; CU;
D O I：
10.1016/j.msea.2021.141381
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of the Ni/Cu-rich aluminides on the strength of Al-15%Mg2Si-Cu-Ni alloys at room and elevated temperatures was analyzed and revealed. The contribution of aluminides to alloys' strength is promoted with the temperature increasing from 25 degrees C to 350 degrees C. Both Mg2Si and aluminides strengthen Al matrix and carry the load at room temperature (25 degrees C). The thermal stable and interconnected aluminides play the leading role in loadcarrying and load-transfer capacity at high temperature (350 degrees C), resulting in the pronounced contribution to alloys' strength. At 450 degrees C, aluminides lose load-bearing capacity and have no effect on the increase of alloys' strength.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures
    Belke, Jacob A.
    Sanders, Paul G.
    INTERNATIONAL JOURNAL OF METALCASTING, 2025, 19 (02) : 717 - 725
  • [2] Intermetallic phase evolution and strengthening effect in Al-Mg2Si alloys with different Cu/Ni ratios
    Sun, Yilin
    Li, Chong
    Liu, Yongchang
    Yu, Liming
    Li, Huijun
    MATERIALS LETTERS, 2018, 215 : 254 - 258
  • [3] A Study on the Interrelationship between the Microstructural Features and the Elevated Temperature Strength of Multicomponent Al-Si-Cu-Ni Casting Alloys
    Jo, Min-Su
    Cho, Young-Hee
    Lee, Jung-Moo
    Kim, Soo-Bae
    Kim, Su-Hyeon
    Jang, Jae-il
    KOREAN JOURNAL OF METALS AND MATERIALS, 2022, 60 (07): : 489 - 501
  • [4] Effect of Zr on the high cycle fatigue and mechanical properties of Al-Si-Cu-Mg alloys at elevated temperatures
    Liu, Guangyu
    Blake, Paul
    Ji, Shouxun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 809
  • [5] Formation of strength platform in cast Al-Si-Mg-Cu alloys
    Dong, Xixi
    Amirkhanlou, Sajjad
    Ji, Shouxun
    SCIENTIFIC REPORTS, 2019, 9 (1)
  • [6] Influence of Gd content on microstructure and mechanical properties of cast Al-12Si-4Cu-2Ni-0.8Mg alloys
    Sui, Yudong
    Wang, Qudong
    Liu, Teng
    Ye, Bing
    Jiang, Haiyan
    Ding, Wenjiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 : 228 - 235
  • [7] The influence of Cu content and Mg/Si ratio on the strength and formability in Al-Mg-Si-Cu alloys
    Zang, Ruojin
    Ding, Lipeng
    Ehlers, Flemming J. H.
    Jia, Zhihong
    Xu, Shaoqiang
    Li, Yanjun
    Cao, Lingfei
    MATERIALS CHARACTERIZATION, 2023, 205
  • [8] Phases Formation and Evolution at Elevated Temperatures of Al-12Si-3.8Cu-2Ni-1Mg Alloy
    Zuo, Lijie
    Ye, Bing
    Feng, Jian
    Bao, Qinghuang
    Kong, Xiangyang
    Jiang, Haiyan
    Ding, Wenjiang
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (03)
  • [9] Comparative Evaluation of the Mechanical Properties of Al-Si-Cu-Ni-Mg Alloys with Distinct Spatial Architectures at Ambient and High Temperatures
    Hu, Kaiqi
    Gao, Tong
    Liu, Guiliang
    Sun, Qianqian
    Han, Mengxia
    Xu, Qingfei
    Liu, Xiangfa
    METALS AND MATERIALS INTERNATIONAL, 2024,
  • [10] Effect of ε-Al3Ni phase on mechanical properties of Al-Si-Cu-Mg-Ni alloys at elevated temperature
    Zuo, Lijie
    Ye, Bing
    Feng, Jian
    Zhang, Huixia
    Kong, Xiangyang
    Jiang, Haiyan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 772
12345