Micro-electrode discharge machining of TiN/Si3N4 composites

被引：45
|
作者：
Liu, CC [1 ]
Huang, JL [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 701, Taiwan
来源：
BRITISH CERAMIC TRANSACTIONS | 2000年 / 99卷 / 04期
关键词：
D O I：
10.1179/096797800680866
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The feasibility of machining TiN/Si3N4 composites by a micro-EDM method has been explored. Samples of composites containing two different sizes of TiN particles were prepared by hot pressing and the resulting materials characterised in terms of microstructure, strength, fracture toughness, and electrical resistivity. A low electrical resistivity of 1.25 x 10(-3) Omega cm(-1) was obtained in a 40 vol.-% composition. Micropores of 700 mum depth and 70 mum dia. were successfully machined into TiN/Si3N4 composites by the micro-EDM method. The results demonstrated the possibility of machining engineering ceramics by the micro-EDM method through the incorporation of conducting toughening phases. The size and content of TiN particles were found to have substantial effects on the strength, toughness, and electrical resistivity of the composites.
引用
收藏
页码：149 / 152
页数：4
相关论文
共 50 条
  • [21] Effect of the microstructureOf Si3N4 on the adhesion strength of TiN film on Si3N4
    Kim, Young-Gu
    Tatami, Junichi
    Komeya, Katsutoshi
    Kim, Do Kyung
    THIN SOLID FILMS, 2006, 510 (1-2) : 222 - 228
  • [22] Effects of machining on Si3N4 strength
    Mikijelj, B
    Allor, R
    AMERICAN CERAMIC SOCIETY BULLETIN, 2003, 82 (04): : 57 - 60
  • [23] Polysilazane derived micro/nano Si3N4/SiC composites
    Zemanová, M
    Lecomte, E
    Sajgalík, P
    Riedel, R
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (16) : 2963 - 2968
  • [24] Characterization of grain alignment in Si3N4(w)/Si3N4 composites
    Zou, LH
    Park, DS
    Cho, BU
    Huang, Y
    Kim, HD
    MATERIALS LETTERS, 2004, 58 (10) : 1587 - 1592
  • [25] The Si3N4 and Si3N4/TiC layered composites by slip casting
    Yeh, CH
    Hon, MH
    CERAMICS INTERNATIONAL, 1997, 23 (04) : 361 - 366
  • [26] Laser machining of Si3N4 ceramics
    Burck, P
    Wiegel, K
    OPTICAL AND QUANTUM ELECTRONICS, 1995, 27 (12) : 1349 - 1358
  • [27] Research of large-area electrical discharge machining for insulating Si3N4 ceramics with the assisting electrode method
    Hanaoka, D.
    Fukuzawa, Y.
    Yamashita, K.
    Advances in Materials and Processing Technologies XVI, 2014, 939 : 76 - 83
  • [28] Microstructure, fracture behavior and mechanical properties of TiN/Si3N4 composites
    Huang, JL
    Lee, MT
    Lu, HH
    Lii, DF
    MATERIALS CHEMISTRY AND PHYSICS, 1996, 45 (03) : 203 - 210
  • [29] In situ processing of TiN/Si3N4 composites by Ti-Si3N4 solid state reaction
    Huang, QL
    Juan, C
    Wei, P
    Jian, C
    Jie, L
    MATERIALS LETTERS, 1997, 31 (3-6) : 221 - 225
  • [30] Parametric Analysis of μ-Electric Discharge Machining of non-conductive Si3N4
    Ojha, Nirdesh
    Mueller, Claas
    Reinecke, Holger
    ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 560 - 565
12345