Experimental analysis of a rotary heat exchanger for waste heat recovery from the exhaust gas of dryer

被引：28
|
作者：
Akbari, Amirhossein [1 ]
Kouravand, Shahriar [1 ]
Chegini, Gholamreza [1 ]
机构：
[1] Univ Tehran, Agrotechnol Dept, Aburaihan Campus, Tehran, Iran
来源：
APPLIED THERMAL ENGINEERING | 2018年 / 138卷
关键词：
Regenerator; Heat exchanger; Dryer; Efficiency; AIR PREHEATER; REGENERATOR; DESIGN; MODEL; FLOW;
D O I：
10.1016/j.applthermaleng.2018.04.103
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this paper, a rotary heat regenerator is fabricated to preheat the inlet air of the air jet impingement food dryer for by recovery of flue's energy. This regeneration heat exchanger is a rotary matrix made of zigzag shape aluminum sheets with a thickness of 0.5 mm. The effect of thermal recovery on efficiency of air jet impingement dryer is investigated. In addition, the influence of the temperature of the input air, the rotation speed of the matrix and the flow rate of the hot air is investigated on the temperature of fresh air entering at ambient temperature. The experiments are carried out at three levels of parameters. Results show that increasing the rotational speed of the matrix and discharge flow result in decrease of both the outlet temperature of the hot fluid and the efficiency of the heat exchanger. It can conclude that the hot air inlet temperature has the most significant effect on matrix efficiency and heat storage. The efficiency of heat recovery is improved up to 42.2%.
引用
收藏
页码：668 / 674
页数：7
相关论文
共 50 条
  • [1] Experimental Analysis of Packed Spraying Heat Exchanger in Waste Heat Recovery From Flue Gas
    Zhu, Xiao-Lei
    Zhang, Lei
    Meng, Ji-An
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2020, 41 (12): : 3061 - 3067
  • [2] CFD and experimental analysis of solar crop dryer with waste heat recovery system of exhaust gas from diesel engine
    Reddy, R. Meenakshi
    Reddy, E. Siva
    Maheswari, C. Uma
    Reddy, K. Krishna
    2018 2ND INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL SCIENCE, 2018, 164
  • [3] Experimental research on convection-condensation heat transfer characteristics and sootblowing operation strategy of waste heat recovery heat exchanger for dryer exhaust
    Qin, Yuanzhi
    Wang, Jinshi
    Liu, Yiwen
    Duan, Yifei
    Liu, Ming
    Yan, Junjie
    DRYING TECHNOLOGY, 2019, 37 (13) : 1633 - 1646
  • [4] Simulation of exhaust gas heat recovery from a spray dryer
    Golman, Boris
    Julklang, Wittaya
    APPLIED THERMAL ENGINEERING, 2014, 73 (01) : 899 - 913
  • [5] Waste heat and water recovery characteristics of heat exchangers for dryer exhaust
    Qin, Yuanzhi
    Fu, Hao
    Wang, Jinshi
    Liu, Ming
    Yan, Junjie
    DRYING TECHNOLOGY, 2018, 36 (06) : 709 - 722
  • [6] Waste heat recovery using heat pipe heat exchanger for heating automobile using exhaust gas
    Yang, F
    Yuan, XG
    Lin, GP
    APPLIED THERMAL ENGINEERING, 2003, 23 (03) : 367 - 372
  • [7] Analysis of printed circuit heat exchanger (PCHE) potential in exhaust waste heat recovery
    Zhang, Hongfei
    Shi, Lingfeng
    Xuan, Wang
    Chen, Tianyu
    Li, Yurong
    Tian, Hua
    Shu, Gequn
    APPLIED THERMAL ENGINEERING, 2022, 204
  • [8] Analysis of Soot Deposition Effects on Exhaust Heat Exchanger for Waste Heat Recovery System
    Chen, Tianyu
    Li, Hanqing
    Wu, Yuzeng
    Che, Jiaqi
    Fang, Mingming
    Li, Xupeng
    ENERGIES, 2024, 17 (17)
  • [9] Design of heat exchanger for waste heat recovery from producer gas
    Tandale, Madhukar S.
    Joshi, Sandeep M.
    THEORETICAL AND EXPERIMENTAL ASPECTS OF HEAT AND MASS TRANSFER, 2008, : 83 - +
  • [10] Heat recovery from dryer exhaust air
    Krokida, MK
    Bisharat, GI
    DRYING TECHNOLOGY, 2004, 22 (07) : 1661 - 1674
12345