EFFECT OF DEGASSING AND GRAIN REFINEMENT ON HOT TEARING TENDENCY IN Al8Si3Cu ALLOY

被引：13

作者：

Uludag, Muhammet ^{[1
]}

Cetin, Remzi ^{[2
]}

Dispinar, Derya ^{[3
]}

Tiryakioglu, Murat ^{[4
]}

机构：

[1] Bursa Tech Univ, Met & Mat Engn, Bursa, Turkey

[2] Karatay Univ, Engn Fac, Konya, Turkey

[3] Istanbul Univ, Engn Fac, Istanbul, Turkey

[4] Univ North Florida, Sch Engn, Jacksonville, FL USA

来源：

INTERNATIONAL JOURNAL OF METALCASTING | 2018年 / 12卷 / 03期

关键词：

casting; aluminum alloys; grain refining; simulation; hot tearing; REDUCED PRESSURE TEST; ALUMINUM-ALLOYS; TEMPERATURE; MECHANISMS; BEHAVIOR; CRACKING; TI;

D O I：

10.1007/s40962-017-0197-9

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effect of melt quality on hot tearing susceptibility of Al8Si3Cu alloy was examined under six different conditions, by using a traditional T-shaped mold. Grain refinement was carried out by two different modifiers: AlTi5B1 and Al3B. For each test, samples were cast before and after degassing of melt. Therefore, a new hot tearing tendency index was developed by both bifilm calculations and porosity that occurred in the middle of T-zone of casting parts. Results indicated that hot tearing of cast aluminum alloys was a complex phenomenon, and bifilms play a major role, especially by compensating for shrinkage and consequently contributing to the inconsistencies in results.

引用

页码：589 / 595

页数：7

共 50 条

[21] Hot Tearing Susceptibility of Binary Mg-Gd Alloy Castings and Influence of Grain Refinement
Luo, Shifeng
Yang, Guangyu
Zou, Zhen
Ouyang, Shuxia
Xiao, Lei
Jie, Wanqi
[J]. ADVANCED ENGINEERING MATERIALS, 2018, 20 (08)
[22] Effect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy
Davis, T. A.
Bichler, L.
D'Elia, F.
Hort, N.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 759 : 70 - 79
[23] Effects of Pouring and Mold Temperatures on the Fluidity and Hot Tearing Susceptibility of Al-3.5Si-0.5Mg-0.4Cu Alloy
Zou, GuoTong
Zhang, HengHua
Yang, YiTao
Lu, FuMin
Yu, ZhongTu
Wang, Chenjun
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (10) : 2511 - 2517
[24] Effect of Cu on the Hot Tearing Susceptibility of Al-6Zn-2.5Mg-xCu Alloy
Chen, Yongqiang
Liu, Zheng
Liu, Shimeng
Guo, Hui
Liu, Jia
Sheng, Xiaofang
[J]. INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (01) : 130 - 140
[25] Synergistic effect of in situ TiB2 particle and Ti solute on fluidity and hot tearing susceptibility of Al-Li-Cu-X alloy
Shao, Lixiong
Li, Xianfeng
Zhao, Guoping
Deng, Yaqi
Chen, Dong
Xia, Cunjuan
Wang, Haowei
[J]. JOURNAL OF MATERIALS SCIENCE, 2024, 59 (37) : 17666 - 17687
[26] Grain refinement of pure aluminium and Al-7Si with Al-3B master alloy
Birol, Y.
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (03) : 363 - 367
[27] Grain refinement in a commercial Al-Mg-Sc alloy under hot ECAP conditions
Sitdikov, O.
Sakai, T.
Avtokratova, E.
Kaibyshev, R.
Kimura, Y.
Tsuzaki, K.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2): : 18 - 30
[28] Hot Tearing Behavior in Double Ternary Eutectic Alloy System: Al-Mg-Si Alloys
Hu, Bo
Li, Dejiang
Li, Zixin
Xu, Jiangkun
Wang, Xueyang
Zeng, Xiaoqin
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (02): : 789 - 805
[29] Effect of adding Pr on the microstructure and hot tearing sensitivity of as-cast Al-Cu-Mg alloys
Yue, Chunyu
Yuan, Xiaoguang
Wang, Yuxiang
Su, Ming
[J]. MATERIALS CHARACTERIZATION, 2022, 191
[30] Hot tearing in Al-Mg-Si alloys with minor additions of Cu or Mn
Sweet, Lisa
Taylor, John A.
Couper, Malcolm J.
Easton, Mark
[J]. ALUMINIUM CAST HOUSE TECHNOLOGY XII, 2011, 693 : 217 - +

← 1 2 3 4 5 →