Analysis and Design of the SVM Direct Torque and Flux Control Scheme for IPM Synchronous Motors

被引:0
|
作者
Foo, Gilbert [1 ]
Goon, C. S. [1 ]
Rahman, M. F. [1 ]
机构
[1] Univ New S Wales, Sydney, NSW, Australia
来源
2009 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-3 | 2009年
关键词
Direct torque and flux control; integral of time multiplied by the absolute of the error (ITAE) criterion; interior permanent magnet synchronous motor; space vector modulation (SVM); SENSORLESS DIRECT TORQUE; DRIVE; RIPPLE;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper presents a comprehensive analysis of the direct torque and flux control (DTFC) scheme for interior permanent magnet synchronous motor (IPMSM) drives. Closed-loop regulation of the torque and stator flux linkage are achieved via two independent proportional-integral (PI) controllers. The reference voltage vectors are generated by a space vector modulation (SVM) unit. A mathematical analysis of the DTFC principle is investigated in this paper. Furthermore, a rigorous design of the controller gains is undertaken. The design solution follows the integral of time multiplied by the absolute of the error (ITAE) criterion. Simulation and experimental results verify the effectiveness and robustness of the design approach.
引用
收藏
页码:1161 / 1166
页数:6
相关论文
共 50 条
  • [21] Investigation and Improvement of Torque Response of Control System Based on Direct Torque Control in Interior Permanent Magnet Synchronous Motors
    Inoue, Yukinori
    Morimoto, Shigeo
    Sanada, Masayuki
    ELECTRICAL ENGINEERING IN JAPAN, 2012, 181 (02) : 55 - 65
  • [22] Direct torque control for interior permanent magnet synchronous motors using matrix converters
    Xiao, D.
    Rahman, M. F.
    IPEMC 2006: CES/IEEE 5TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2006, : 1873 - +
  • [23] A Simple Duty Cycle Modulated Direct Torque Control for Permanent Magnet Synchronous Motors
    Niu, Feng
    Han, Zhenduo
    Xu, Wenjing
    Huang, Xiaoyan
    Zhang, Jian
    Wu, Lijian
    Li, Kui
    Fang, Youtong
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [24] Design of Speed Regulator at Direct Torque Control of Switched Reluctance Motors
    Krasovsky, Alexander
    Vasyukov, Sergey
    Kuznetsov, Sergey
    2019 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING, APPLICATIONS AND MANUFACTURING (ICIEAM), 2019,
  • [25] A Robust Field-weakening Algorithm for Direct Torque and Flux Controlled IPM Synchronous Machine with Space Vector Modulation
    Zhang, X.
    Foo, G.
    2019 10TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ECCE ASIA (ICPE 2019 - ECCE ASIA), 2019,
  • [26] Constant Switching Frequency Based Direct Torque Control of Interior Permanent Magnet Synchronous Motors With Reduced Ripples and Fast Torque Dynamics
    Foo, Gilbert Hock Beng
    Zhang, Xinan
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2016, 31 (09) : 6485 - 6493
  • [27] Sensorless Direct Torque and Flux Controlled IPM Synchronous Machine Fed by Matrix Converter Over a Wide Speed Range
    Xiao, Dan
    Rahman, Muhammed Fazlur
    IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2013, 9 (04) : 1855 - 1867
  • [28] A COMPARATIVE STUDY BETWEEN DIRECT TORQUE CONTROL AND PREDICTIVE TORQUE CONTROL FOR AXIAL FLUX PERMANENT MAGNET SYNCHRONOUS MACHINES
    Siami, Mohsen
    Gholamian, S. Asghar
    Yousefi, Mosayeb
    JOURNAL OF ELECTRICAL ENGINEERING-ELEKTROTECHNICKY CASOPIS, 2013, 64 (06): : 346 - 353
  • [29] Deadbeat Direct Torque and Flux Control for Permanent Magnet Synchronous Motor Based on Stator Flux Oriented
    Lin, Xiaogang
    Huang, Wenxin
    Jiang, Wen
    Zhao, Yong
    Zhu, Shanfeng
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (05) : 5078 - 5092
  • [30] A Novel Sequential Direct Torque Control Scheme for Seven-phase Induction Motors
    Yang, Guanghui
    Yang, Jiaqiang
    Wang, Yan
    Hussain, Haseeb
    Li, Sheng
    Deng, Rongfeng
    Yan, Liang
    2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1, 2020, : 2041 - 2047