Microstructure characterization and mechanical properties of Al-based coating on magnesium alloy prepared by Supersonic Particles Deposition

被引：3
作者：
Wang, X. M. [1 ]
Zhu, S. [1 ]
Han, G. F. [1 ]
Chang, Q. [1 ]
机构：
[1] Acad Armored Force Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷
关键词：
Magnesium alloy; Supersonic particles deposition; Microstructure; Mechanical properties; Formation mechanism;
D O I：
10.1016/j.phpro.2013.11.042
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Al-Si coating on the surface of AZ81E magnesium alloy was fabricated by Supersonic Particles Deposition, then microstructure observation, micro-hardness testing, bonding strength measurement and formation mechanism analysis of the deposited coating were accomplished by relative analytical technique, respectively. The results elucidated that Al-Si coating on magnesium alloy surface prepared by Supersonic Particles Deposition was formed via the integrated combination of mechanical bonding and metallurgical bonding. The coating was compacted and its hardness was about 1.8 times to that of the substrate. Average bonding strength of the interface was above 40MPa. (C) 2013 The Authors. Published by Elsevier B.V.
引用
收藏
页码：267 / 271
页数：5
相关论文
共 50 条
  • [31] Microstructure and Mechanical Properties of Heterogeneous AZ91 Magnesium Alloy Prepared by Controlling Extrusion Ratio
    Liu K.
    Zhang B.
    Huang G.
    Jiang B.
    Tang A.
    Pan F.
    Cailiao Daobao/Materials Reports, 2022, 36 (20):
  • [32] Microstructure and mechanical properties of ZE10 magnesium alloy prepared by equal channel angular pressing
    Ying Liu1)
    InternationalJournalofMineralsMetallurgyandMaterials, 2009, 16 (05) : 559 - 563
  • [33] Effect of deposition current on microstructure and tribological properties of tin-based Babbitt alloy on magnesium alloy deposited by TIG process
    He, Xiangwei
    Li, Gang
    Song, Shuainan
    Hua, Jiale
    SURFACE & COATINGS TECHNOLOGY, 2025, 496
  • [34] Preparation and Anti-scratch Property of Supersonic-Particles-Deposited Coating on Magnesium Alloy
    Wang, Xiaoming
    Zhu, Sheng
    Chang, Qing
    Han, Guofeng
    ADVANCES IN TEXTILE ENGINEERING AND MATERIALS, 2013, 627 : 756 - 760
  • [35] Effect of strontium on the microstructure and mechanical properties of AZ31 magnesium alloy
    Wang, YX
    Zeng, XQ
    Ding, WJ
    Luo, AA
    Sachdev, AK
    MAGNESIUM TECHNOLOGY 2005, 2005, : 85 - 89
  • [36] Effects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy
    Zhang, Daidong
    Zhang, Hu
    Yu, Xuehua
    Zhang, Xiaoru
    Fang, Daqing
    MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 500 - 504
  • [37] Influence of Heat Treatment on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy Prepared by Selective Laser Melting (SLM)
    Liu, Shuai
    Guo, Hanjie
    MATERIALS, 2022, 15 (20)
  • [38] Effect of Y on Microstructure and Mechanical Properties of Mg-6Al-1Zn-1.8Gd Magnesium Alloy
    Chen, Xiao-ya
    Li, Quan-an
    Zhang, Qing
    Chen, Jun
    Jiang, Hui-zhen
    PROCEEDINGS OF 2014 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING, 2014, 1035 : 303 - 306
  • [39] Microstructure and Mechanical Properties of 2A50 Wrought Aluminum Alloy Prepared by Laser Melting Deposition
    Zhao Yuhui
    Sun Libo
    Zhao Jibin
    Wang Zhiguo
    He Zhenfeng
    He Chen
    CHINA SURFACE ENGINEERING, 2022, 35 (03) : 273 - 280
  • [40] Investigation on work hardening effect generated during dynamic formation of Al-based coating on magnesium alloy
    Wang Xiaoming
    Zhu Sheng
    Feng Xueqiang
    Liu Yuxiang
    MECHANICAL ENGINEERING, MATERIALS AND ENERGY III, 2014, 483 : 75 - 78
12345