Microstructure characterization and mechanical properties of Al-based coating on magnesium alloy prepared by Supersonic Particles Deposition

被引：3
|
作者：
Wang, X. M. [1 ]
Zhu, S. [1 ]
Han, G. F. [1 ]
Chang, Q. [1 ]
机构：
[1] Acad Armored Force Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷
关键词：
Magnesium alloy; Supersonic particles deposition; Microstructure; Mechanical properties; Formation mechanism;
D O I：
10.1016/j.phpro.2013.11.042
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Al-Si coating on the surface of AZ81E magnesium alloy was fabricated by Supersonic Particles Deposition, then microstructure observation, micro-hardness testing, bonding strength measurement and formation mechanism analysis of the deposited coating were accomplished by relative analytical technique, respectively. The results elucidated that Al-Si coating on magnesium alloy surface prepared by Supersonic Particles Deposition was formed via the integrated combination of mechanical bonding and metallurgical bonding. The coating was compacted and its hardness was about 1.8 times to that of the substrate. Average bonding strength of the interface was above 40MPa. (C) 2013 The Authors. Published by Elsevier B.V.
引用
收藏
页码：267 / 271
页数：5
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of a rare earth rich magnesium casting alloy
    Angelini, V.
    Boromei, I.
    Ceschini, L.
    Morni, A.
    METALLURGIA ITALIANA, 2015, (09): : 31 - 36
  • [22] EFFECT OF SUBLAYER ON THE STRUCTURES AND TRIBOLOGICAL PROPERTIES OF GLC COATING ON Al-BASED ALLOY
    Shi Huiying
    Long Yanni
    Jiang Bailing
    Chen Dichun
    ACTA METALLURGICA SINICA, 2012, 48 (08) : 983 - 988
  • [23] Microstructure and mechanical properties of Mg–6Zn–0.5Y magnesium alloy prepared with ultrasonic treatment
    Di Li
    Han-Song Xue
    Gang Yang
    Ding-Fei Zhang
    Rare Metals, 2017, 36 : 622 - 626
  • [24] Microstructure and Mechanical Properties of Magnesium prepared by Spark Plasma Sintering
    Muhammad, Wan Nur Azrina Wan
    Mutoh, Yoshiharu
    Miyashita, Yukio
    MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 764 - +
  • [25] Microstructure, Mechanical Properties and Corrosion Behavior of the Aluminum Alloy Components Repaired by Cold Spray with Al-Based Powders
    Zhang, Zhiyi
    Sun, Xiaoguang
    Huang, Shiming
    Han, Xiaohui
    Zhu, Ping
    Shi, Chunyuan
    Zhang, Tengfei
    METALS, 2021, 11 (10)
  • [26] Effect of cooling rate on microstructure and mechanical properties of rapidly solidified Al-based bulk alloys
    Zhuo, Longchao
    Pang, Shujie
    Wang, Hui
    Zhang, Tao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S117 - S122
  • [27] Microstructure and mechanical properties of new Mg-Bi-Al-Zn wrought magnesium alloy
    Meng S.-J.
    Yu H.
    Cui H.-W.
    Zhang J.
    Zhao W.-M.
    Wang Z.-F.
    Qin C.-L.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2017, 27 (05): : 894 - 901
  • [28] Effects of TaN nanoparticles on microstructure, mechanical properties and tribological performance of PEEK coating prepared by electrophoretic deposition
    Cao, Lin
    Zhang, Peng
    Li, Shuang-jian
    Wang, Qi-wei
    Zeng, Da-hai
    Yu, Chuan-yong
    Li, Qing-yang
    Liao, Yu-wen
    Lin, Zhi-dan
    Li, Wei
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2022, 32 (10) : 3334 - 3348
  • [29] Microstructure and mechanical properties of ZE10 magnesium alloy prepared by equal channel angular pressing
    Liu, Ying
    Li, Wei
    Li, Yuan-yuan
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2009, 16 (05) : 559 - 563
  • [30] Microstructure and cavitation erosion characteristics of Al-Si alloy coating prepared by electrospark deposition
    Wang, Wei-fu
    Wang, Mao-cai
    Sun, Feng-jiu
    Zheng, Yu-gui
    Jiao, Jian-min
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (21) : 5116 - 5121
12345