Microstructure characterization and mechanical properties of Al-based coating on magnesium alloy prepared by Supersonic Particles Deposition

被引：3
|
作者：
Wang, X. M. [1 ]
Zhu, S. [1 ]
Han, G. F. [1 ]
Chang, Q. [1 ]
机构：
[1] Acad Armored Force Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷
关键词：
Magnesium alloy; Supersonic particles deposition; Microstructure; Mechanical properties; Formation mechanism;
D O I：
10.1016/j.phpro.2013.11.042
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Al-Si coating on the surface of AZ81E magnesium alloy was fabricated by Supersonic Particles Deposition, then microstructure observation, micro-hardness testing, bonding strength measurement and formation mechanism analysis of the deposited coating were accomplished by relative analytical technique, respectively. The results elucidated that Al-Si coating on magnesium alloy surface prepared by Supersonic Particles Deposition was formed via the integrated combination of mechanical bonding and metallurgical bonding. The coating was compacted and its hardness was about 1.8 times to that of the substrate. Average bonding strength of the interface was above 40MPa. (C) 2013 The Authors. Published by Elsevier B.V.
引用
收藏
页码：267 / 271
页数：5
相关论文
共 50 条
  • [1] Study on Microstructure and mechanical properties of Cold Spraying Al coating on Magnesium Alloy
    Liu, Yuliang
    Li, Xiangli
    Zhang, Qing
    Xu, Chunhua
    PROCEEDINGS OF THE 2015 INTERNATIONAL POWER, ELECTRONICS AND MATERIALS ENGINEERING CONFERENCE, 2015, 17 : 210 - 213
  • [2] Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
    Kim J.
    Hong S.H.
    Eckert J.
    Kim K.B.
    Material Design and Processing Communications, 2019, 1 (02):
  • [3] Microstructure and mechanical properties of magnesium alloy prepared by lost foam casting
    田学锋
    樊自田
    黄乃瑜
    吴和保
    董选普
    TransactionsofNonferrousMetalsSocietyofChina, 2005, (01) : 7 - 13
  • [4] Microstructure and mechanical properties of magnesium alloy prepared by lost foam casting
    Tian, XF
    Fan, ZT
    Huang, NY
    Wu, HB
    Dong, XP
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (01) : 7 - 13
  • [5] Processing, microstructure and mechanical characterization of a new magnesium based multicomponent alloy
    Tun, K. S.
    Nahata, Anchal
    Vincent, S.
    Gupta, M.
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 1044 - 1047
  • [6] Microstructure and Mechanical Properties of TiAl Alloy Prepared by Laser Melting Deposition
    Zhang Feng
    Yue Hangyu
    Sun Bingbing
    Li Ruifeng
    Zhao Haisheng
    Yao Youxing
    Pang Yibin
    LASER & OPTOELECTRONICS PROGRESS, 2024, 61 (09)
  • [7] Microstructure Characterization and Tribological Properties Evaluation on WC/Cu Composite Coating Prepared by Supersonic Laser Deposition
    Huang X.
    Wu L.
    Li B.
    Wang W.
    Zhang Q.
    Kovalenko V.S.
    Yao J.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2020, 56 (10): : 78 - 85
  • [8] MICROSTRUCTURE AND MECHANICAL BEHAVIOUR OF AL-BASED ALLOY OBTAINED BY LIQUID FORGING TECHNIQUE
    Peter, I.
    Rosso, M.
    Bivol, C.
    METALURGIA INTERNATIONAL, 2009, 14 : 15 - 18
  • [9] Microstructure and Mechanical Properties of Magnesium Alloy Prepared by Repetitive Upsetting
    Guo, Wei
    Wang, Qudong
    Liu, Manping
    Liu, Xintao
    Zhou, Hao
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 1261 - 1266
  • [10] Investigation on melting phenomena generated during dynamic formation of Al-based coating on magnesium alloy
    Wang Xiaoming
    Zhu Sheng
    Feng Xueqiang
    Liu Yuxiang
    MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2014, 488-489 : 189 - +
12345