Effects of Hot Bending Parameters on Microstructure and Mechanical Properties of Weld Metal for X80 Hot Bends

被引：10

作者：

Wang, Xu ^{[1
]}

Liao, Bo ^{[1
]}

Wu, Da-yong ^{[1
]}

Han, Xiu-lin ^{[2
]}

Zhang, Yuan-sheng ^{[3
]}

Xiao, Fu-ren ^{[1
]}

机构：

[1] Yanshan Univ, Coll Mat Sci & Engn, Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Hebei, Peoples R China

[2] CNPC Bohai Petr Equipment Mfg Co Ltd, Qingxian 062658, Hebei, Peoples R China

[3] China Petr Technol & Dev Corp, Beijing 100028, Peoples R China

来源：

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2014年 / 21卷 / 12期

基金：

中国国家自然科学基金;

关键词：

hot induction bend; X80; steel; weld metal; heat treatment; microstructure; PIPELINE STEEL;

D O I：

10.1016/S1006-706X(14)60194-1

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Mechanical properties of weld metal are the key factors affecting the quality of heavy-wall X80 hot induction bends. The effects of bending parameters on the mechanical properties of weld metal for hot bends were investigated by simulation conducted on a Gleeble-3500 thermal simulator. Continuous cooling transformation (CCT) diagrams of the weld metal were also constructed. The influences of hot bending parameters (such as reheating temperature, cooling rate, and tempering temperature) on the microstructure and mechanical properties of weld metal were also analyzed. Results show that the strength of all weld metal specimens is higher than the value indicated in the technical specification and increases with the increase of reheating temperature, cooling rate, and tempering temperature. The impact toughness is apparently related to the variation of reheating temperature, cooling rate, and tempering temperature.

引用

页码：1129 / 1135

页数：7

共 14 条

[1] Batista G. Z., 2007, P ASME INT PIP C 200, V3, P89
[2] Effect of titanium addition on the microstructure and inclusion formation in submerged arc welded HSLA pipeline steel
Beidokhti, B.
Koukabi, A. H.
Dolati, A.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 4027 - 4035
[3] Effects of post-weld heat treatment cycles on microstructure and mechanical properties of electric resistance welded pipe welds
Chung, P. C.
Ham, Yoonjin
Kim, Sanghoon
Lim, Jeongho
Lee, Changhee
[J]. MATERIALS & DESIGN, 2012, 34 : 685 - 690
[4] [贾书君 Jia Shujun], 2012, [材料热处理学报, Transactions of Materials and Heat Treatment], V33, P76
[5] Kim B., 2005, J ENG MAT TECHNOL T, V172, P204
[6] Effects of heat treatment process and niobium addition on the microstructure and mechanical properties of low carbon steel weld metal
Lu, Shanping
Wei, Shitong
Li, Dianzhong
Li, Yiyi
[J]. JOURNAL OF MATERIALS SCIENCE, 2010, 45 (09) : 2390 - 2402
[7] Mannucci A., 2009, MATER TECHNOL, V6, P175
[8] Muthmann E., 2009, PIP TECHN C OST BELG, P211
[9] Oryshchenko A. S., 2013, Welding International, V27, P681, DOI 10.1080/09507116.2012.753279
[10] Effects of welding wire composition and welding process on the weld metal toughness of submerged arc welded pipeline steel
Ren, De-liang
Xiao, Fu-ren
Tian, Peng
Wang, Xu
Liao, Bo
[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2009, 16 (01) : 65 - 70

← 1 2 →