Mathematical analysis of transient temperature changes in the chip root during milling

被引：3
作者：
Zoltan, Palmai [1 ]
机构：
[1] Univ Miskolc, Inst Mfg Sci, Miskolc, Hungary
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017年 / 91卷 / 9-12期
关键词：
Cutting temperature; Intermittent cutting; Mathematical modelling; Salomon; CUTTING TEMPERATURE; TOOL; FACE; MODEL; PREDICTION; SURFACE; SYSTEM; FIELD; WEAR;
D O I：
10.1007/s00170-017-0042-6
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Transient temperature changes occur in the chip root during intermittent cutting such as milling. Based on the examinations of Salomon and one of our previous study, a mathematical model that is suitable for the description of the fast and massive changes of temperature was elaborated. The model was validated by measurements discussed in literature and by a specific cutting examination. It was proven that the maximum temperature within a cycle increases only up to a certain point, then it starts to decrease if strong cooling is applied during the increase of cutting speed. This may also be true for the fluctuation of temperature in general, without cooling; however, in other cases, the development of this phenomenon depends on the actual specifications of the used technology at the maximum temperature.
引用
收藏
页码：4219 / 4232
页数：14
相关论文
共 43 条
  • [1] High bandwidth temperature measurement in interrupted cutting of difficult to machine materials
    Armendia, M.
    Garay, A.
    Villar, A.
    Davies, M. A.
    Arrazola, P. J.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) : 97 - 100
  • [2] Carou D, 2014, ADV MAT SCI, V38, P110
  • [3] Temperature determination at the chip-tool interface using an inverse thermal model considering the tool and tool holder
    Carvalho, S. R.
    Silva, S. M. M. Lima e
    Machado, A. R.
    Guimaraes, G.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) : 97 - 104
  • [4] ANALYSIS OF TOOL TEMPERATURE-FLUCTUATION IN INTERRUPTED CUTTING
    CHAKRAVERTI, G
    PANDEY, PC
    MEHTA, NK
    [J]. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1984, 6 (02): : 99 - 105
  • [5] Csernak G, 2012, SIMPLE NONLINEAR CUT, V2012, p[19, 24]
  • [6] Analysis of transient average tool temperatures in face milling
    Cui, Xiaobin
    Zhao, Jun
    Pei, Zhiqiang
    [J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (06) : 786 - 791
  • [7] An adaptive system for turning process control based on tool temperature feedback
    D'Errico, GE
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 78 (1-3) : 43 - 47
  • [8] da Silva MB, 1999, J MATER PROCESS TECH, V88, P195
  • [9] High-speed machining: An approach to process analysis
    Dagiloke, IF
    Kaldos, A
    Douglas, S
    Mills, B
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 54 (1-4) : 82 - 87
  • [10] A systems theory approach to modelling of cutting temperature with experimental identification
    DErrico, GE
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1997, 37 (02) : 149 - 158
12345