Effect of quenching condition on micro-inhomogeneous structure of Al-Fe-Ce amorphous alloy

被引：0
|
作者：
Zhang, L [1 ]
Bian, XF [1 ]
Wu, YS [1 ]
Li, H [1 ]
机构：
[1] Shandong Univ Technol, Coll Mat Sci & Engn, Jinan 250061, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2000年 / 10卷 / 03期
关键词：
Al-Fe-Ce; amorphous alloys; micro inhomogeneous structure; quenching temperature;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The microstructures of liquid and amorphous Al90Fe5Ce5 alloys were studied by X-ray diffraction (XRD), and the crystalline behavior of the amorphous alloy was also investigated by differential scanning calorimetry (DSC). The distinct pre-peaks were found on the structure factors of the liquid and amorphous alloys. The quenching temperature affects the pre-peak area, but does not affect its position. The reduction of quenching temperature decreases the crystallization temperature and the activation energy of the Al-Fe-Ce amorphous alloy. Quenched from 1050 degrees C, a novel structure with a fine dispersion of Al nanophase particles homogeneously distributed in the amorphous matrix was obtained. And the sensitivity of the Al-Fe-Ce amorphous alloy to the quenching temperature reflects the micro-inhomogeneity of the melt.
引用
收藏
页码：414 / 417
页数：4
相关论文
共 50 条
  • [21] The effect of Mg addition on microstructure and tensile and stress rupture properties of a P/M Al-Fe-Ce alloy
    Prakash, U
    Raghu, T
    Kamat, SV
    Gokhale, AA
    SCRIPTA MATERIALIA, 1998, 39 (07) : 867 - 872
  • [22] Melt Structure and Formation of Main Strengthening Phases in Al-Fe-Ce Alloy with EET Theory; [Al-Fe-Ce合金熔体结构及主要强化相形成的EET分析]
    Qu H.
    Liu W.
    Jiang X.
    Lou Q.
    Qu H.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2020, 44 (09): : 1003 - 1008
  • [23] THE EFFECT OF MECHANICAL ALLOYING ON THE ELEVATED-TEMPERATURE DEFORMATION-BEHAVIOR OF A RAPIDLY SOLIDIFIED AL-FE-CE ALLOY
    YANEY, DL
    OVECOGLU, ML
    NIX, WD
    JOURNAL OF METALS, 1987, 39 (10): : A37 - A37
  • [24] An x-ray absorption near-edge spectroscopic study of the structure of passive films on amorphous Al-Fe-Ce alloys
    Mansour, AN
    Melendres, CA
    Poon, SJ
    He, Y
    Shiflet, GJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1996, 143 (02) : 614 - 619
  • [25] INTERNAL-FRICTION DAMPING IN A RAPIDLY SOLIDIFIED AL-FE-CE POWDER-METALLURGY ALLOY
    WINHOLTZ, RA
    WEINS, WN
    JOURNAL DE PHYSIQUE, 1985, 46 (C-10): : 375 - 378
  • [26] STRUCTURE AND DECOMPOSITION OF Al-Fe-Ce ALLOYS RAPIDLY QUENCHED FROM THE LIQUID STATE.
    Kamio, Akihiko
    Tezuka, Hiroyasu
    Sato, Tatsuo
    Long, Than Trong
    Takahashi, Tsuneo
    1600, (35):
  • [27] ELECTRON-MICROSCOPY OF RAPIDLY SOLIDIFIED WELDMENTS IN A POWDER-METALLURGY AL-FE-CE ALLOY
    BAESLACK, WA
    HOU, KH
    DEVLETIAN, JH
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1989, 8 (06) : 716 - 720
  • [28] Effect of Quenching Condition on Corrosion Behavior of 6063 Al Alloy
    He, Chunlin
    Li, Rui
    Meng, Xiaodan
    Lu, Shuai
    Xie, Leipeng
    Ma, Guofeng
    Wang, Jianming
    PROCEEDINGS OF THE 2015 6TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING, 2016, 32 : 1873 - 1876
  • [29] EFFECT OF CERIUM CONTENT ON THE DEFORMATION-BEHAVIOR OF RAPIDLY SOLIDIFIED AL-FE-CE ALLOYS
    LEGZDINA, D
    PARTHASARATHY, TA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (08): : 2155 - 2158
  • [30] INTERNAL-FRICTION DAMPING IN A RAPIDLY-SOLIDIFIED AL-FE-CE POWDER-METALLURGY ALLOY
    WEINS, WN
    WINHOLTZ, RA
    JOURNAL OF METALS, 1985, 37 (08): : A53 - A53
12345