Elastic string check valves can efficiently heighten the piezoelectric pump's working frequency

被引:32
作者
Ren, Yi Jun [1 ]
Ma, Yu Ting [2 ]
Huang, Dan [1 ]
Chen, Jian [1 ]
Feng, Zhi Hua [1 ]
机构
[1] Univ Sci & Technol China, Dept Precis Machinery & Precis Instrumentat, Hefei 230026, Anhui, Peoples R China
[2] Chinese Acad Sci, Suzhou Inst Biomed Engn & Technol, CAS Key Lab Biomed Diagnost, Suzhou 215163, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Piezoelectric micropump; Power density; String check valve; FLOW-RATE; MICROVALVE; MICROPUMP; FABRICATION;
D O I
10.1016/j.sna.2016.04.026
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This study presents the design, analysis, fabrication process and experimental results of elastic string check valves for high frequency and high flow rate piezoelectric pumps. The moving part of the check valve is elastic rubber strings. Analysis revealed that the rubber string valve could exhibit high working frequency and is beneficial to construct large outflow pumps. A separable micropump was designed for testing frequency performance of the string valve. Experimental results demonstrated that the flow rate almost increased linearly with driving frequency below 1 kHz despite the first resonant frequency of the rubber string occurring at only 488 Hz. The maximum flow rate of water was 67.1 mL/min when the micropump was driven with a sinusoidal voltage of 170 V-pp at 1 kHz. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:126 / 132
页数:7
相关论文
共 2 条
  • [1] Development and Characterization a Single-Active-Chamber Piezoelectric Membrane Pump with Multiple Passive Check Valves
    Zhang, Ronghui
    You, Feng
    Lv, Zhihan
    He, Zhaocheng
    Wang, Haiwei
    Huang, Ling
    SENSORS, 2016, 16 (12):
  • [2] Matching the Optimal Operating Mode of Polydimethylsiloxane Check Valves by Tuning the Resonant Frequency of the Resonator in a Piezoelectric Pump for Improved Output Performance
    Chen, Jian
    Meng, Fanci
    Feng, Zihan
    Gao, Wenzhi
    Liu, Changhai
    Zeng, Yishan
    MICROMACHINES, 2023, 14 (01)