Collaborative test of determination of iodine value in fish oils .1. Reaction time and carbon tetrachloride or cyclohexane as solvents

Twenty-two laboratories participated in a collaborative test to determine the iodine value (IV) of eight samples of fish oil (four with IV < 150, four with IV > 150) with either carbon tetrachloride (AOCS Official Method Cd 1-25)or cyclohexane (AOCS Recommended Practice Cd 1b-87) as solvent and either 1 or 2 h of reaction time. Laboratories received coded duplicate samples (hidden duplicates) and carried out duplicate determinations on each oil by each solvent-time combination (open duplicates). Replacing carbon tetrachloride with cyclohexane resulted in a lower IV P < 0.001). The decrease averaged 1.6 IV units for low-IV oils and 3.8 IV units for high-IV oils; this difference in response of 2.2 IV units between low-and high-IV oils was significant (P < 0.001). Increasing the reaction time had a relatively small effect 10.34 +/- 0.18). There was no interaction of reaction time with solvent or oil type. Cyclohexane caused emulsions, which made it difficult to titrate residual iodine and thus increased the variability of the determination. The repeatability standard deviations(sd, based on hidden duplicates, for l-h reaction time with carbon tetrachloride and cyclohexane were 2.17 and 3.35, respectively. The corresponding reproducibility standard deviations were 2.73 and 4.53.