Microstructure of MC-Fe Composite Layer on Carbon Steel by Laser Surface Alloying

被引：1
|
作者：
Yamaguchi, Takuto [1 ,2 ]
Hagino, Hideki [1 ]
Takemura, Mamoru [1 ]
Nakahira, Atsushi [2 ]
机构：
[1] Technol Res Inst Osaka Prefecture, Izumi, Osaka 5941157, Japan
[2] Osaka Prefecture Univ, Sakai, Osaka 5998531, Japan
来源：
JOURNAL OF LASER MICRO NANOENGINEERING | 2014年 / 9卷 / 02期
关键词：
laser surface alloying; microstructure; metal matrix composite; carbide; steel; TI-6AL-4V; COATINGS; MMC;
D O I：
10.2961/jlmn.2014.02.0001
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Laser alloying using carbide forming elements (Ti, Nb, and V) was carried out to form an MCFe composite coating on a carbon steel substrate for improving wear resistance. The microstructure of laser alloyed zone was studied by OM, SEM/EDS, STEM, and XRD to reveal the effect of additional elements and laser alloying conditions on the distribution of carbides. The laser alloyed zone was found to consist of MC carbide and iron matrix. Hardness and wear properties of the laser alloyed zone were improved as compared with the laser transformation hardened sample. Dispersion of carbide within the laser alloyed zone is shown to be effective in decreasing the friction coefficient and improving wear resistance.
引用
收藏
页码：83 / 87
页数：5
相关论文
共 50 条
  • [1] Microstructure of Fe-TiC Composite Surface Layer on Carbon Steel Formed by Laser Alloying Process
    Yamaguchi, Takuto
    Hagino, Hideki
    Takemura, Mamoru
    Hasegawa, Yasunori
    Michiyama, Yasuhiro
    Nakahira, Atsushi
    MATERIALS TRANSACTIONS, 2013, 54 (09) : 1755 - 1759
  • [2] Microstructure and wear resistance of composite layers on a ductile iron with multicarbide by laser surface alloying
    Yan, Hua
    Wang, Aihua
    Xiong, Zhaoting
    Xu, Kaidong
    Huang, Zaowen
    APPLIED SURFACE SCIENCE, 2010, 256 (23) : 7001 - 7009
  • [3] FORMATION OF HARD COMPOSITE LAYER ON TOOL STEEL BY LASER ALLOYING
    Bonek, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (02) : 719 - 724
  • [4] Microstructure and TiC evolution behavior of TiC/Fe3Al composite coating fabricated by laser surface alloying
    Liu, Y. (yfliu@bjtu.edu.cn), 1600, Science Press (41):
  • [5] Improvement of the corrosion behavior of low carbon steel by laser surface alloying
    Abdolahi, B.
    Shahverdi, H. R.
    Torkamany, M. J.
    Emami, M.
    APPLIED SURFACE SCIENCE, 2011, 257 (23) : 9921 - 9924
  • [6] TiC reinforced steel matrix composite layers produced by laser surface alloying
    Fernandez-Vicente, A.
    Castro, G.
    Arias, J. L.
    Montealegre, M. A.
    1ST INTERNATIONAL CONFERENCE ON NEW MATERIALS FOR EXTREME ENVIRONMENTS, 2009, 59 : 55 - 61
  • [7] Laser Surface Alloying of Nickel and Chromium (III) Electroplated Carbon Steel with Nd: YAG Laser
    Prince, M.
    Gopalakrishnan, P.
    Bhuvanashekaran, G.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2010, 29 (04) : 313 - 324
  • [8] Laser Surface Alloying of Ni-Co Electroplated Low Carbon Steel
    Hussain, A.
    Akhter, R.
    Farooq, W. A.
    Aslam, M.
    ADVANCED MATERIALS XI, 2010, 442 : 137 - 143
  • [9] DIODE LASER SURFACE ALLOYING OF ARMOR STEEL WITH TUNGSTEN CARBIDE
    Janicki, D.
    Gorka, J.
    Kwasny, W.
    Golombek, K.
    Kondracki, M.
    Zuk, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (02) : 473 - 481
  • [10] Laser Surface Alloying of Sintered Stainless Steel
    Dudek, Agata
    Lisiecka, Barbara
    Radek, Norbert
    Orman, Lukasz J.
    Pietraszek, Jacek
    MATERIALS, 2022, 15 (17)
12345