Simulation of Semiconductor Converter for Electromagnetic Separator

被引:0
作者
Vozmilov, A. G. [1 ]
Evdokimov, A. A. [2 ]
Charykov, V., I [2 ]
机构
[1] Natl Res Univ, South Ural State Univ, Fed State Autonomous Educ Inst Higher Educ, Chelyabinsk, Russia
[2] Kurgan State Agr Acad TS Maltsev, Fed State Budgetary Educ Inst Higher Educ, Kurgan, Russia
来源
2020 INTERNATIONAL URAL CONFERENCE ON ELECTRICAL POWER ENGINEERING (URALCON) | 2020年
关键词
semiconductor converter; simulation; magnetic field; electromagnetic separator; METALS;
D O I
10.1109/uralcon49858.2020.9216262
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The electromagnetic separator for removing magnetic particles from liquid materials is considered in the paper. The model of semiconductor converter for electromagnetic separator is developed in MATLAB Simulink. The converter load parameters (active resistance and inductance of magnetizing coils) are defined. Inductance of the coils is calculated in the Elcut application. The main parameters of the power source and its elements are defined via the rectifier simulation. Using the obtained results the experimental laboratory prototype of the electromagnetic separator is developed and assembled. To evaluate the efficiency of the developed separator, its magnetic system was calculated by the finite element method. The maximum magnetic induction in the concentrator, according to calculations, occurs above the pole piece with a magnetizing coil, the minimum is between the two cores of the electromagnet.
引用
收藏
页码:459 / 463
页数:5
相关论文
共 27 条