Effect of Laser Shock Peening on the Fatigue Behavior of Thin Aluminum Panels

被引：6
作者：
Taddia, Sara [1 ]
Troiani, Enrico [1 ]
机构：
[1] Univ Bologna, Via Fontanelle 40, I-47121 Forli, Italy
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 10期
关键词：
Residual Stress; Thin Panels; Laser Shock Peening; Fatigue Crack Propagation; CRACK GROWTH-PROPERTIES; RESIDUAL-STRESSES; GENERATION;
D O I：
10.1016/j.matpr.2015.10.090
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to evaluate the effectiveness of the Laser Shock Peening (LSP) in reducing the fatigue related problems in metallic structures, thin aluminum specimens have been peened along straight patterns perpendicular to the crack. Despite of the induced compressive residual stresses, the tests showed a negative effect of the LSP on the fatigue crack propagation performances. Starting from the numerical assessment of the self-balancing residual stress distribution and the measurements of the residual stresses, the fatigue crack growth has been analytically evaluated and compared with experimental results. The comparison highlights the sensitivity of the crack propagation to the width of the LSP treated strip and its position relative to the crack. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5006 / 5014
页数：9
相关论文
共 21 条
  • [1] Wavelength dependent of laser shock-wave generation in the water-confinement regime
    Berthe, L
    Fabbro, R
    Peyre, P
    Bartnicki, E
    [J]. JOURNAL OF APPLIED PHYSICS, 1999, 85 (11) : 7552 - 7555
  • [2] Ding K., 2006, LASER SHOCK PEENING
  • [3] Fitzpatrick M.E., 2005, NATL MEASUREMENT GOO, P5
  • [4] Furfari D., 2013, P ICAF 2013 S JER IS
  • [5] Heckenberger U., 2011, P 2 INT C LAS PEEN, P22
  • [6] Effects of laser energy on fatigue crack growth properties of 6061-T6 aluminum alloy subjected to multiple laser peening
    Huang, S.
    Zhou, J. Z.
    Sheng, J.
    Lu, J. Z.
    Sun, G. F.
    Meng, X. K.
    Zuo, L. D.
    Ruan, H. Y.
    Chen, H. S.
    [J]. ENGINEERING FRACTURE MECHANICS, 2013, 99 : 87 - 100
  • [7] Effects of laser peening with different coverage areas on fatigue crack growth properties of 6061-T6 aluminum alloy
    Huang, S.
    Zhou, J. Z.
    Sheng, J.
    Luo, K. Y.
    Lu, J. Z.
    Xu, Z. C.
    Meng, X. K.
    Dai, L.
    Zuo, L. D.
    Ruan, H. Y.
    Chen, H. S.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2013, 47 : 292 - 299
  • [8] Ivetic G., 2011, P ICAF 2011 S MONTR
  • [9] Fatigue in laser shock peened open-hole thin aluminium specimens
    Ivetic, Goran
    Meneghin, Ivan
    Troiani, Enrico
    Molinari, Gianluca
    Ocana, Jose
    Morales, Miguel
    Porro, Juan
    Lanciotti, Agostino
    Ristori, Vjola
    Polese, Claudia
    Plaisier, Jasper
    Lausi, Andrea
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 : 573 - 579
  • [10] Numerical analysis of Laser Shock Peening as a process for generation of compressive residual stresses in open hole specimens
    Ivetic, Goran
    Meneghin, Ivan
    Troiani, Enrico
    [J]. RESIDUAL STRESSES VIII, 2011, 681 : 267 - 272
123