Response surface methodology application to fly ash based geopolymer synthesized by alkali fusion method

被引：28
作者：
Demir, Funda [1 ]
Derun, Emek Moroydor [1 ]
机构：
[1] Yildiz Tech Univ, Dept Chem Engn, Istanbul, Turkey
来源：
JOURNAL OF NON-CRYSTALLINE SOLIDS | 2019年 / 524卷
关键词：
Geopolymer; Fly ash; RSM method; Al2O3; addition; METAKAOLIN-BASED GEOPOLYMER; HEAVY-METAL ADSORPTION; COMPRESSIVE STRENGTH; DESIGN; OPTIMIZATION;
D O I：
10.1016/j.jnoncrysol.2019.119649
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The rapid consumption of natural sources due to the technological development brings environmental and economic problems and makes usage of alternative sources obligatory. Fly ash is one of an industrial waste that can be used as alumina silicate source for geopolymerization. In this study, fly ash based geopolymer was synthesized by Alkali Fusion Method. The experimental set up was designed by Design Expert Trial 7 program and the optimum geopolymer synthesis conditions including additional Al2O3 ratio, curing temperature were determined by Central Composite Inscribed Design (CCI) Method. Also, ANOVA analysis and optimization were carried out. X-ray fluorescence spectrometer (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope-Energy-dispersive X-ray (SEM-EDX) and Brunauer-Emmett-Teller (BET) analyzes were applied for the characterization studies of the raw materials and optimum geopolymer sample. According to optimization and analysis results, the optimum Al2O3 addition (%) and curing temperatures were determined as 70.76% and 36.75 degrees C, respectively. The degree of geopolymerization reaction for optimum geopolymer sample was found as 97%.
引用
收藏
页数：8
相关论文
共 25 条
[1]  
Ahmad R, 2017, CONF LASER ELECTR
[2]  
Alehyen S., 2017, J MAT ENV SCI, V8, P1783, DOI DOI 10.1165/2014/
[3]   Leaching of F-type fly ash based geopolymers [J].
Arioz, E. ;
Arioz, O. ;
Kockar, O. Mete .
CHISA 2012, 2012, 42 :1114-1120
[4]  
Cevheroglu Cira S, 2016, ADV MATER SCI ENG, V2016, P1
[5]   The heavy metal adsorption characteristics on metakaolin-based geopolymer [J].
Cheng, T. W. ;
Lee, M. L. ;
Ko, M. S. ;
Ueng, T. H. ;
Yang, S. F. .
APPLIED CLAY SCIENCE, 2012, 56 :90-96
[6]   An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash [J].
Criado, M. ;
Fernandez-Jimenez, A. ;
de la Torre, A. G. ;
Aranda, M. A. G. ;
Palomo, A. .
CEMENT AND CONCRETE RESEARCH, 2007, 37 (05) :671-679
[7]  
Gamage N., Overview of Different Types of Fly Ash and Their Use as a Building and Construction Material
[8]   Modeling and optimization of compressive strength and bulk density of metakaolin-based geopolymer using central composite design: A numerical and experimental study [J].
Ghanbari, M. ;
Hadian, A. M. ;
Nourbakhsh, A. A. ;
MacKenzie, K. J. D. .
CERAMICS INTERNATIONAL, 2017, 43 (01) :324-335
[9]   Metakaolin based geopolymer as an effective adsorbent for adsorption of zinc(II) and nickel(II) ions from aqueous solutions [J].
Kara, Ilknur ;
Yilmazer, Dilek ;
Akar, Sibel Tunali .
APPLIED CLAY SCIENCE, 2017, 139 :54-63
[10]   Synthesis of volcanic ash-based geopolymer mortars by fusion method: Effects of adding metakaolin to fused volcanic ash [J].
Kouamo, H. Tchakoute ;
Mbey, J. A. ;
Elimbi, A. ;
Diffo, B. B. Kenne ;
Njopwouo, D. .
CERAMICS INTERNATIONAL, 2013, 39 (02) :1613-1621
123