Crystallization of poly(ethylene terephthalate) polycarbonate blends .1. Unreinforced systems

The crystallization and transition temperatures of poly(ethylene terephthalate) (PET) in blends with polycarbonate (PC) is considered using thermal analysis. Additives typically used in commercial polyester blends, transesterification inhibitor and antioxidant, are found to enhance the crystallization rate of PET. Differential scanning calorimetry (DSC) reveals two glass transition temperatures in PET/PC blends, consistent with an immiscible blend. Optical microscopy observations are also consistent with an immiscible blend. Small shifts observed in the T-g of each component may be due to interactions between the phases. The degree of crystallinity of PET in PET/PC blends is significantly depressed for high PC contents. Also, in blends with PC content greater than 60 wt %, two distinct crystallization exotherms are observed in dynamic crystallization from the melt. The isothermal crystallization kinetics of PET, PET modified with blend additives, and PET in PET/PC blends have been evaluated using DSC and the data analyzed using the Avrami model. The crystallization of PET in these systems is found to deviate from the Avrami prediction in the later stages of crystallization. Isothermal crystallization data are found to superimpose when plotted as a function of time divided by crystallization half-time. A weighted series Avrami model is found to describe the crystallization of PET and PET/PC blends during all stages of crystallization. (C) 1996 John Wiley & Sons, Inc.