Bond behavior in pull-out of a ribbed rebar from concrete with recycled concrete aggregates

被引:9
作者
Leibovich, Orit [1 ,2 ]
Yankelevsky, David Z. [3 ]
机构
[1] Technion Israel Inst Technol, Natl Bldg Res Inst, IL-32000 Haifa, Israel
[2] Sami Shamoon Coll Engn, Ashdod, Israel
[3] Technion Israel Inst Technol, Fac Civil & Environm Engn, Struct Engn, IL-32000 Haifa, Israel
关键词
Bond-stress; Recycled concrete aggregates; Natural aggregates; Pull-out test; Longitudinal slip; Circumferential strain; DEFORMED STEEL BARS; STRENGTH; REINFORCEMENT; STRAINS;
D O I
10.1016/j.cscm.2022.e01607
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In recent years, there is a worldwide growing interest in using concrete mixes with recycled concrete aggregates (RCA). Reinforced concrete is the composite of concrete and steel rebars, where the rebars provide relatively higher tensile strength and ductility, energy absorption ca-pacity, and crack control. This composite action depends on the interfacial bond between the rebar and the concrete. The bond behavior is commonly evaluated from pull-out test results which yield the global relationship between the average bond-stress and the corresponding slip and depend on the concrete properties and the rebar geometry. The present study investigates the bond behavior in concrete with RCA in comparison to concrete with natural aggregates aiming at short bond lengths to obtain the local bond-slip behavior. Two major complementary aspects of the bond behavior in the longitudinal (bond stress-slip) and circumferential directions (circum-ferential strain-slip) are studied, and the post-test interior damage is investigated. The study found that the magnitudes of the maximum bond stress are not affected by the aggregate type and are in accordance with the concrete compressive strength, but different internal damage mech-anisms develop in the specimens of the two aggregate types. The different internal damage mechanisms in RCA specimens affect the internal confinement level's development and the circumferential strains' magnitude, which are considerably different than in concrete with natural aggregates.
引用
收藏
页数:17
相关论文
共 35 条
[1]  
[Anonymous], 1970, Materials and Structures, V3, P175
[2]  
[Anonymous], 2000, FIB B, V10, P34
[3]   Evaluation of the Bond Strengths Between Concrete and Reinforcement as a Function of Recycled Concrete Aggregate Replacement Level [J].
Arezoumandi, Mandi ;
Steele, Amanda R. ;
Volz, Jeffery S. .
STRUCTURES, 2018, 16 :73-81
[4]  
Bai G., 2010, PROCEEDING 2 INT C W
[5]   Structural reliability of bonding between steel rebars and recycled aggregate concrete [J].
Breccolotti, Marco ;
Materazzi, Annibale Luigi .
CONSTRUCTION AND BUILDING MATERIALS, 2013, 47 :927-934
[6]   The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement [J].
Butler, L. ;
West, J. S. ;
Tighe, S. L. .
CEMENT AND CONCRETE RESEARCH, 2011, 41 (10) :1037-1049
[7]   Flexural bond behavior of reinforced recycled aggregate concrete [J].
Dong, Hongying ;
Song, Yu ;
Cao, Wanlin ;
Sun, Wenjuan ;
Zhang, Jianwei .
CONSTRUCTION AND BUILDING MATERIALS, 2019, 213 (514-527) :514-527
[8]  
Federation International du Beton, 2013, MOD COD 2010
[9]   Bond strength and prediction model for deformed bar embedded in hybrid fiber reinforced recycled aggregate concrete [J].
Gao, Danying ;
Yan, Huanhuan ;
Fang, Dong ;
Yang, Lin .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 265
[10]   Bond strength prediction of tension lap splice for deformed steel bars in recycled aggregate concrete [J].
Gaurav, Govind ;
Singh, Bhupinder .
MATERIALS AND STRUCTURES, 2017, 50 (05)