Finite Element Analysis and Experimental Testing of Stiffness of the Sarafix External Fixator

被引:34
作者
Elmedin, Mesic [1 ]
Vahid, Avdic [1 ]
Nedim, Pervan [1 ]
Nedzad, Repcic [1 ]
机构
[1] Fac Mech Engn, Vilsonovo Setaliste Br 9, Sarajevo 71000, Bosnia & Herceg
来源
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 | 2015年 / 100卷
关键词
the Sarafix system; finite element method; experimental testing; displacements; stiffness;
D O I
10.1016/j.proeng.2015.01.533
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents research results of a stiffness analysis of a Sarafix external fixation system. The stiffness property of the external fixator affects the local biomechanical and biological environment of fracture healing. The research has been conducted in a case when one of the Sarafix unilateral biplanar fixator configurations has been applied to a tibia with an open fracture. A stiffness analysis was performed using FEA and experimental testing under three types of loads: axial compression, AP ( anterior-posterior) four-point bending and torsion. 3D geometrical and FEM model of the fixator configuration was formed using CATIA V5 software system and a structural analysis was performed afterwards. Verification of the results obtained from a structural analysis was carried out through experimental testing by comparing values of an appropriate component of displacement at the point of load. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:1598 / 1607
页数:10
相关论文
共 8 条
[1]  
Dozic S., 2011, THESIS
[2]  
Fleming B., 1999, CLIN ORTHOP RELAT R, V241
[3]  
Jasinska-Choromanska D., 2001, 39 INT C EXP STRESS
[4]  
Koo TKK, 2005, BIO-MED MATER ENG, V15, P433
[5]  
Mesic E., 2012, P 12 INT DES C DESIG, P1029
[6]  
Mesic E., 2012, ANN DAAAM 2012 P 23
[7]  
Mesic E., 2013, MECH ENG
[8]   Biomechanical analysis of unilateral external skeletal fixators combined with IM-pin and without IM-pin using finite-element method [J].
Radke, H ;
Aron, DN ;
Applewhite, A ;
Zhang, GG .
VETERINARY SURGERY, 2006, 35 (01) :15-23