Determination of the local environment of silicon and the microstructure of quaternary CrAl(Si)N films

被引:86
作者
Endrino, J. L.
Palacin, S.
Aguirre, M. H.
Gutierrez, A. [1 ]
Schaefers, F.
机构
[1] Univ Autonoma Madrid, Dept Fis Aplicada, E-28049 Madrid, Spain
[2] Lawrence Berkeley Lab, Berkeley, CA 94720 USA
[3] Swiss Fed Labs Mat Testing & Res EMPA, CH-8600 Dubendorf, Switzerland
[4] BESSY, D-12489 Berlin, Germany
关键词
physical vapor deposition; transmission electron microscopy; X-ray absorption spectroscopy; nitrides; nanocrystalline microstructure;
D O I
10.1016/j.actamat.2006.11.014
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nanocomposite CrAlSiN compounds prepared by the cathodic are evaporation technique were subjected to structural and mechanical characterization tests. X-ray diffraction, X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) were employed to investigate the effects of Si addition on the structure and phase development of the metastable NaCl structure of high aluminum CrAlN films. TEM studies revealed that partial substitution of the metal component by Si in CrAlN results in the nucleation of a wurtzite h-AlN phase even for amounts of silicon as low as similar to 2-3 at.%. XAS measurements at the Cr and Si K-edges indicated that the local environment of Cr atoms is strongly affected by the Si addition, and that silicon may also be part of the crystalline phase. These results indicate the formation of complex Cr-Si-X compounds, where X can be N, Al or both, and the formation of composite nanocrystalline CrAlSiN films. (c) 2006 Acta Materialia, Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:2129 / 2135
页数:7
相关论文
共 27 条
  • [1] Berry AJ, 2004, AM MINERAL, V89, P790
  • [2] Superelastic (Cr,Al)N coatings for high end spindle bearings
    Brecher, C
    Spachtholz, G
    Bobzin, K
    Lugscheider, E
    Knotek, O
    Maes, M
    [J]. SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) : 1738 - 1744
  • [3] PVD grown (Ti,Si,Al)N nanocomposite coatings and (Ti,Al)N/(Ti,Si)N multilayers:: structural and mechanical properties
    Carvalho, S
    Ribeiro, E
    Rebouta, L
    Pacaud, J
    Goudeau, P
    Renault, PO
    Rivière, JP
    Tavares, CJ
    [J]. SURFACE & COATINGS TECHNOLOGY, 2003, 172 (2-3) : 109 - 116
  • [4] Hard AlTiN, AlCrNPVD coatings for machining of austenitic stainless steel
    Endrino, J. L.
    Fox-Rabinovich, G. S.
    Gey, C.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 200 (24) : 6840 - 6845
  • [5] The influence of alloying elements on the phase stability and mechanical properties of AlCrN coatings
    Endrino, JL
    Derflinger, V
    [J]. SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4) : 988 - 992
  • [6] Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings
    Fox-Rabinovich, GS
    Beake, BD
    Endrino, JL
    Veldhuis, SC
    Parkinson, R
    Shuster, LS
    Migranov, MS
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21) : 5738 - 5742
  • [7] Elastic and plastic work of indentation as a characteristic of wear behavior for cutting tools with nitride PVD coatings
    Fox-Rabinovich, GS
    Veldhuis, SC
    Scvortsov, VN
    Shuster, LS
    Dosbaeva, GK
    Migranov, MS
    [J]. THIN SOLID FILMS, 2004, 469 : 505 - 512
  • [8] Nanocomposite nc-TiAlSiN and nc-TiN-BN coatings:: their applications on substrates made of cemented carbide and results of cutting tests
    Holubár, P
    Jílek, M
    Síma, M
    [J]. SURFACE & COATINGS TECHNOLOGY, 1999, 120 : 184 - 188
  • [9] Variation of chemical bonding nature of layered LiMnO2 upon delithiation/relithiation and Cr substitution
    Hwang, SJ
    Park, HS
    Choy, JH
    [J]. SOLID STATE IONICS, 2002, 151 (1-4) : 275 - 283
  • [10] XAS study of chromium in Li2MSiO4 (M=Mg, Zn)
    Jousseaume, C
    Ribot, F
    Kahn-Harari, A
    Vivien, D
    Villain, F
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 200 : 425 - 431