Study on ac-PMIG welding of AZ31B magnesium alloy

Welding of AZ31B magnesium alloy is carried out using alternating current pulsed metal inert gas (ac-PMIG) welding with 1.6 mm diameter of filler wire. Typical current waveform is used to make sure arc given an accurate energy input into filler wire. The arc characteristics, metal transfer forms, microstructure and mechanical property of ac-PMIG welding of AZ31B magnesium are investigated. The results show that a stable welding procedure and continuous joints can be obtained easily under a wide range of welding parameters. The most important factors for ac-PMIG welding are negative electrode (EN) ratio and pulse rework current, which give an accurate energy input into filler wire. The grain in fusion zone is much finer and more uniform, and grain size does not grow significantly in the heat affected zone compared with base metal. The average ultimate tensile strength of weld beads is 97.2% of base metal.