Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing

被引：260
|
作者：
Farshidianfar, Mohammad H. [1 ]
Khajepour, Amir [1 ]
Gerlich, Adrian P. [1 ]
机构：
[1] Univ Waterloo, Mech & Mechatron Engn Dept, Waterloo, ON N2L 3G1, Canada
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2016年 / 231卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
Real-time cooling rate; Microstructure; Laser Additive Manufacturing; Infrared thermal imaging; 316L STAINLESS-STEEL; SOLIDIFICATION; DEPOSITION; FEATURES;
D O I：
10.1016/j.jmatprotec.2016.01.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An infrared thermal imaging system is developed to compare the effects of cooling rate and melt pool temperature on the microstructure of 316L stainless steel produced by Laser Additive Manufacturing (LAM) with injected powder melting. The system captures the real-time cooling rate to provide online monitoring and control of the microstructure at the onset of solidification. Further study is conducted to evaluate cooling rate effects on grain size, phase transformations and hardness. Cooling rate changes are also studied with respect to the traveling speed, in order to identify a suitable controlling action for a microstructural controller. The study provides a strong experimental justification of the current theories in solidification and microstructural evolution during the LAM with injected powder melting process. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：468 / 478
页数：11
相关论文
共 50 条
  • [1] Real-time control of microstructure in laser additive manufacturing
    Farshidianfar, Mohammad H.
    Khajepour, Amir
    Gerlich, Adrian
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (5-8): : 1173 - 1186
  • [2] Real-time control of microstructure in laser additive manufacturing
    Mohammad H. Farshidianfar
    Amir Khajepour
    Adrian Gerlich
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 1173 - 1186
  • [3] Real-time Splatter Tracking in Laser Powder Bed Fusion Additive Manufacturing
    Fu, Yanzhou
    Priddy, Braden
    Downey, Austin R. J.
    Yuan, Lang
    NDE 4.0, PREDICTIVE MAINTENANCE, COMMUNICATION, AND ENERGY SYSTEMS, 2023, 12489
  • [4] Listening for defects in laser additive manufacturing in real time
    Metal Powder Report, 2023, 78 (06)
  • [5] Real-Time Nondestructive Evaluation of Additive Manufacturing Using a Laser Vibrometer and Shock Tube
    Liu, Han
    Laflamme, Simon
    Morgan, Carter
    Nelson, Matthew
    Bentil, Sarah A.
    JOURNAL OF NONDESTRUCTIVE EVALUATION, DIAGNOSTICS AND PROGNOSTICS OF ENGINEERING SYSTEMS, 2023, 6 (01):
  • [6] Real-time structural validation for material extrusion additive manufacturing
    Fu, Yanzhou
    Downey, Austin R. J.
    Yuan, Lang
    Huang, Hung-Tien
    ADDITIVE MANUFACTURING, 2023, 65
  • [7] Real-Time Nonlinear Tracking Control of Photopolymerization for Additive Manufacturing
    Classens, Koen
    Hafkamp, Thomas
    Westbeek, Steyn
    Remmers, Joris J. C.
    Weiland, Siep
    2021 AMERICAN CONTROL CONFERENCE (ACC), 2021, : 1365 - 1370
  • [8] Manipulation of microstructure in laser additive manufacturing
    Bai, Shuang
    Yang, Lihmei
    Liu, Jian
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2016, 122 (05):
  • [9] Manipulation of microstructure in laser additive manufacturing
    Shuang Bai
    Lihmei Yang
    Jian Liu
    Applied Physics A, 2016, 122
  • [10] Effect of Interlayer Cooling on Microstructure and Microhardness of FeCoNiCrAl High-Entropy Alloy Fabricated by Laser Additive Manufacturing
    Hu, Zengrong
    Chen, Mingrui
    Wu, Zhikang
    Luo, Shuncun
    Wang, Xiaonan
    Xu, Jiale
    Zhang, Hai
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
12345