Friction Stir Lap Welding of Magnesium Alloy and Zinc-Coated Steel

被引：40
|
作者：
Chen, Y. C. [1 ]
Nakata, K. [1 ]
机构：
[1] Osaka Univ, Joining & Welding Res Inst, Ibaraki 5670047, Japan
来源：
MATERIALS TRANSACTIONS | 2009年 / 50卷 / 11期
关键词：
welding; mechanical properties; microstructure; metals; MECHANICAL-PROPERTIES; MICROSTRUCTURAL EVOLUTION; STAINLESS-STEEL; CARBON-STEEL; MG ALLOY; TEXTURE;
D O I：
10.2320/matertrans.M2009022
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AZ31 Mg alloy and zinc-coated steel were lap welded using friction stir welding technology. The microstructures and mechanical properties of the joints were examined. The lap.;hear tensile test results showed that the welding speed had a significant effect on the failure loads of the joints at the rotation speed of 1500 rpm. The maximum failure loads of 3.4kN, 65% of that of the zinc-coated steel base material, could be obtained when the welding speed was 150 mm/min. Microstructure analysis showed that the intervention of zinc coat promoted the formation of Mg-Zn low-melting-point eutectic structure at the interface. The joining mechanism and the role of Zn coat on friction stir lap welding of Mg alloy and zinc-coated steel were put forward. [doi: 10.2320/matertrans.M2009022]
引用
收藏
页码：2598 / 2603
页数：6
相关论文
共 50 条
  • [41] Lap Welded Joint of Aluminum and Titanium Alloy by Friction Stir Welding
    Amirov, A. I.
    Beloborodov, V. A.
    Ivanov, A. N.
    Zhukov, L. L.
    PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
  • [42] Friction stir lap welding of thermoplastic resins to 3003 aluminum alloy
    Ozawa, Takamasa
    Katoh, Kazuyoshi
    Maeda, Masakatsu
    Keikinzoku/Journal of Japan Institute of Light Metals, 2015, 65 (09): : 403 - 410
  • [43] Underwater dissimilar friction stir lap welding of aluminum alloy and CFRTP
    Zhang, Yuan
    Sun, Yibo
    Liu, Yong
    Guan, Kainan
    Wei, Xiao
    Yang, Xinhua
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2024,
  • [44] Joining of aluminum alloy and polymer via friction stir lap welding
    Huang, Yongxian
    Meng, Xiangchen
    Wang, Yuhua
    Xie, Yuming
    Zhou, Li
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 257 : 148 - 154
  • [45] Friction Stir Welding of Stainless Steel Thin Sheets in Lap Configuration
    Buffa, Gianluca
    Fratini, Livan
    Filice, Luigi
    Micari, Fabrizio
    NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 2013, 1567 : 990 - 993
  • [46] Friction Stir Lap Welding of Inconel 625 and a High Strength Steel
    Bossle, Elisangela Pelizzari
    Vicharapu, Buchibabu
    Lemos, Guilherme Vieira Braga
    de Lima Lessa, Cleber Rodrigo
    Bergmann, Luciano
    dos Santos, Jorge Fernandez
    Clarke, Thomas Gabriel Rosauro
    De, Amitava
    METALS, 2023, 13 (01)
  • [47] Numerical and experimental investigation on friction stir lap welding of aluminium to steel
    Das, H.
    Jana, S. S.
    Pal, T. K.
    De, A.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2014, 19 (01) : 69 - 75
  • [48] Aluminium-steel lap joining by multipass friction stir welding
    Leitao, C.
    Arruti, E.
    Aldanondo, E.
    Rodrigues, D. M.
    MATERIALS & DESIGN, 2016, 106 : 153 - 160
  • [49] Welding load, temperature, and material flow in ultrasonic vibration enhanced friction stir lap welding of aluminum alloy to steel
    Liu, Tao
    Gao, Song
    Shi, Lei
    Kumar, Sachin
    Yin, Zhaoliang
    Sun, Zhiping
    Zhao, Wei
    Qiao, Junnan
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [50] Lap joint of A5083 aluminum alloy and SS400 steel by Friction Stir Welding
    Kimapong, K
    Watanabe, T
    MATERIALS TRANSACTIONS, 2005, 46 (04) : 835 - 841
12345