Friction Stir Lap Welding of Magnesium Alloy and Zinc-Coated Steel

被引：40
|
作者：
Chen, Y. C. [1 ]
Nakata, K. [1 ]
机构：
[1] Osaka Univ, Joining & Welding Res Inst, Ibaraki 5670047, Japan
来源：
MATERIALS TRANSACTIONS | 2009年 / 50卷 / 11期
关键词：
welding; mechanical properties; microstructure; metals; MECHANICAL-PROPERTIES; MICROSTRUCTURAL EVOLUTION; STAINLESS-STEEL; CARBON-STEEL; MG ALLOY; TEXTURE;
D O I：
10.2320/matertrans.M2009022
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AZ31 Mg alloy and zinc-coated steel were lap welded using friction stir welding technology. The microstructures and mechanical properties of the joints were examined. The lap.;hear tensile test results showed that the welding speed had a significant effect on the failure loads of the joints at the rotation speed of 1500 rpm. The maximum failure loads of 3.4kN, 65% of that of the zinc-coated steel base material, could be obtained when the welding speed was 150 mm/min. Microstructure analysis showed that the intervention of zinc coat promoted the formation of Mg-Zn low-melting-point eutectic structure at the interface. The joining mechanism and the role of Zn coat on friction stir lap welding of Mg alloy and zinc-coated steel were put forward. [doi: 10.2320/matertrans.M2009022]
引用
收藏
页码：2598 / 2603
页数：6
相关论文
共 50 条
  • [21] GTAW of Zinc-Coated Steel and Aluminum Alloy
    Borrisutthekul, Rattana
    Seangsai, Anchalee
    Paonil, Wuttikron
    ENGINEERING JOURNAL-THAILAND, 2018, 22 (03): : 39 - 49
  • [22] Friction stir lap welding thin aluminum alloy sheets
    Wang, Tao
    Gong, Xue
    Ji, Shude
    Xue, Gang
    Lv, Zan
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2020, 39 (01) : 663 - 670
  • [23] Study on Friction Stir Lap Welding of Aluminium to Steel Sheets
    Meng, Lingfei
    Chen, Shujin
    Zhang, Jiaqi
    Wang, Di
    Zhang, Hao
    Wei, Xiaopeng
    METALS, 2019, 9 (05)
  • [24] Characterization of aluminum/steel lap joint by friction stir welding
    Elrefaey, A
    Gouda, M
    Takahashi, M
    Ikeuchi, K
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (01) : 10 - 17
  • [25] Characterization of aluminum/steel lap joint by friction stir welding
    A. Elrefaey
    M. Gouda
    M. Takahashi
    K. Ikeuchi
    Journal of Materials Engineering and Performance, 2005, 14 : 10 - 17
  • [26] Friction stir welding of aluminum alloy to steel
    Kimapong, K
    Watanabe, T
    WELDING JOURNAL, 2004, 83 (10) : 277S - 282S
  • [27] Microstructure of friction stir welding of aluminium alloy to magnesium alloy
    Kostka, A.
    Coelho, R. S.
    dos Santos, J.
    Pyzalla, A. R.
    SCRIPTA MATERIALIA, 2009, 60 (11) : 953 - 956
  • [28] Interfacial Reaction during Dissimilar Friction Stir Lap Welding of Aluminum Alloy to Stainless Steel
    Ogura, Tomo
    Nishida, Taichi
    Takahashi, Makoto
    Nishida, Hidehito
    Fujimoto, Mitsuo
    Hirose, Akio
    ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 389 - +
  • [29] Elucidation of interfacial microstructure and properties in friction stir lap welding of aluminium alloy and mild steel
    Kar, Amlan
    Vicharapu, Buchibabu
    Morisada, Yoshiaki
    Fujii, Hidetoshi
    MATERIALS CHARACTERIZATION, 2020, 168
  • [30] A study on weldability of zinc-coated steel sheets in lap joint configuration
    El-Batahgy, AM
    STEEL RESEARCH, 1997, 68 (12): : 546 - 551
12345