The Design of Current Probe in the IEC Conducted Emission Measurement above 1 GHz

被引:0
|
作者
Chang, Yin-Cheng [1 ,2 ]
Lin, Ta-Yeh [2 ]
Wang, Ping-Yi [1 ]
Hsu, Shawn S. H. [1 ]
Yen, Mao-Hsu [3 ]
Chang, Yen-Tang [4 ]
Lin, Ming-Shan [4 ]
Chang, Da-Chiang [2 ]
机构
[1] Natl Tsing Hua Univ, Inst Elect Engn, Hsinchu, Taiwan
[2] Natl Chip Implementat Ctr, Natl Appl Res Labs, Hsinchu, Taiwan
[3] Natl Taiwan Ocean Univ, Dept Comp Sci & Engn, Keelung, Taiwan
[4] MOEA, Bur Stand Metrol & Inspect, Taipei, Taiwan
来源
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2016年
关键词
EMC; EMI; conducted emission; current probe; measurement;
D O I
暂无
中图分类号
TN [电子技术、通信技术];
学科分类号
0809 ;
摘要
A current probe based on IEC standard 61967-4 is proposed to investigate the conducted electromagnetic emission of IC above 1 GHz. The 1 Omega method in direct coupling method is revisited, and the concern for extending frequency range is discussed. The critical resistive network of 1 Omega probe is realized by a semiconductor process instead of the SMD resistors. With the advantage of reduced parasitic effect, the applicable bandwidth can be extended to 2.4 GHz. The proposed 1 Omega probe is verified to fulfill the EMI measurement of IC with operating frequency higher than 1 GHz.
引用
收藏
页码:938 / 939
页数:2
相关论文
共 7 条
  • [1] Implementation of Certified 150-Ω Voltage Probe for IEC 61967-4 Conducted Electromagnetic Emission Measurement
    Chang, Yin-Cheng
    Lin, Ta-Yeh
    Wang, Ping-Yi
    Hsu, Shawn S. H.
    Yen, Mao-Hsu
    Hung, Chun-Yi
    Chang, Da-Chiang
    2018 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2018), 2018,
  • [2] Current Probes for Differential Mode Conducted Emission Measurement
    Knight, D. A.
    Marshall, R. C.
    2017 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY - EMC EUROPE, 2017,
  • [3] Effects of test table materials for EMC measurement above 1 GHz
    Kong, SS
    Chung, SY
    Yoon, YJ
    Yuk, JR
    2003 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), VOLS 1 AND 2, SYMPOSIUM RECORD, 2003, : 244 - 247
  • [4] Investigation on Realizing 1 Ω Current Probe Complied with IEC 61967-4 Direct Coupling Method
    Chang, Yin-Cheng
    Wang, Ping-Yi
    Hsu, Shawn S. H.
    Chang, Yen-Tang
    Chen, Chiu-Kuo
    Cheng, Hsu-Chen
    Chang, Da-Chiang
    2014 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, TOKYO (EMC'14/TOKYO), 2014, : 573 - 576
  • [5] Optical Feeding Amtenna with Wide Bandwidth for Evaluation of Radiated Emission Test Sites above 1 GHz
    Abe, Hideki
    Tanaka, Hideyasu
    Tokuda, Masamitsu
    Ishigami, Shinobu
    2008 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, VOLS 1-3, 2008, : 398 - +
  • [6] EMI measurement method above 1 GHz - Influences of EUT size and rece ving antenna beamwidth
    Miyazaki, C
    Suda, T
    Yamaguchi, T
    Kawano, J
    2002 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, VOLS 1 AND 2, SYMPOSIUM RECORD, 2002, : 611 - 614
  • [7] Design and Validation of a Movable Pin-Contact Miniature Current Probe for Chip-Level EMI Noise Measurement
    Lin, Han-Nien
    Hu, Che-Lun
    Huang, Jen-Fu
    Lin, Ming-Shan
    Lin, Tsung-Ching
    2017 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY - EMC EUROPE, 2017,