Hydrodeoxygenation of oleic acid and canola oil over alumina-supported metal nitrides

被引：145

作者：

Monnier, Jacques ^{[1
]}

Sulimma, Hardi ^{[2
]}

Dalai, Ajay ^{[2
]}

Caravaggio, Gianni ^{[1
]}

机构：

[1] Nat Resources Canada, CanmetENERGY, Ottawa, ON K1A 1M1, Canada

[2] Univ Saskatchewan, Dept Chem Engn, Saskatoon, SK S7N 5E9, Canada

来源：

APPLIED CATALYSIS A-GENERAL | 2010年 / 382卷 / 02期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Hydrodeoxygenation; Metal nitrides; Molybdenum nitride; Vanadium nitride; Tungsten nitride; Canola oil; Oleic acid; Biomass hydrodeoxygenation; Renewable diesel fuel; CARBIDE; CATALYSTS; HYDRODESULFURIZATION;

D O I：

10.1016/j.apcata.2010.04.035

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Nitrides of molybdenum, tungsten and vanadium supported on gamma-Al2O3 were prepared by temperature-programmed reaction with NH3 and tested as catalysts for hydrodeoxygenation of oleic acid and canola oil at 380-410 degrees C and 7.15 MPa H-2. The molybdenum nitride catalyst was found superior to the vanadium and tungsten nitrides for catalytic hydrotreating of oleic acid in terms of fatty acid conversion, oxygen removal and production of normal alkanes (diesel fuel cetane enhancers). The supported molybdenum nitride favoured the hydrodeoxygenation of oleic acid to n-C18H38 three times out of four compared to decarbonylation and decarboxylation. A 450-h long hydrotreating test performed at 400 degrees C and 8.35 MPa H-2 with Mo2N/Al2O3 and canola oil, indicated that oxygen removal exceeded 90% over the duration of the experiment and that the yield of middle distillate hydrocarbons (diesel fuel) ranged between 38 and 48 wt% (based on liquid feed). Crown Copyright (c) 2010 Published by Elsevier B.V. All rights reserved.

引用

页码：176 / 180

页数：5

共 22 条

[1] Anderson R.B., 1984, FISCHER TROPSCH SYNT, P9
[2] Barin I., 1995, THERMOCHEMICAL DATA, V1, DOI DOI 10.1002/9783527619825
[3] BUSSELL ME, 2003, PREP AM CHEM SOC DIV, V48, P175
[4] CHOUZIER S, 2006, PREP AM CHEM SOC DIV, V51, P285
[5] Study of the temperature-programmed reaction synthesis of early transition metal carbide and nitride catalyst materials from oxide precursors
Claridge, JB
York, APE
Brungs, AJ
Green, MLH
[J]. CHEMISTRY OF MATERIALS, 2000, 12 (01) : 132 - 142
[6] Craig W.K., 1991, United States Pat., Patent No. [4,992,605, 4992605]
[7] FORMATION OF ALKANES, ALKYLCYCLOALKANES AND ALKYLBENZENES DURING THE CATALYTIC HYDROCRACKING OF VEGETABLE-OILS
DAROCHA, GN
BRODZKI, D
DJEGAMARIADASSOU, G
[J]. FUEL, 1993, 72 (04) : 543 - 549
[8] CATALYTIC CONVERSION OF HEVEA-BRASILIENSIS AND VIROLA-SEBIFERA OILS TO HYDROCARBON FUELS
DAROCHA, GN
BENTES, MHS
BRODZKI, D
DJEGAMARIADASSOU, G
[J]. JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY, 1992, 69 (03) : 266 - 271
[9] Hydrodesulfurization over supported monometallic, bimetallic and promoted carbide and nitride catalysts
Diaz, B
Sawhill, SJ
Bale, DH
Main, R
Phillips, DC
Korlann, S
Self, R
Bussell, ME
[J]. CATALYSIS TODAY, 2003, 86 (1-4) : 191 - 209
[10] Hydroprocessing of Bio-Oils and Oxygenates to Hydrocarbons. Understanding the Reaction Routes
Donnis, Bjorn
Egeberg, Rasmus Gottschalck
Blom, Peder
Knudsen, Kim Gron
[J]. TOPICS IN CATALYSIS, 2009, 52 (03) : 229 - 240

← 1 2 3 →