Techno-economic assessment for the production of algal fuels and value-added products: opportunities for high-protein microalgae conversion

被引:27
|
作者
Wiatrowski, Matthew [1 ]
Klein, Bruno C. [1 ]
Davis, Ryan W. [2 ]
Quiroz-Arita, Carlos [2 ]
Tan, Eric C. D. [1 ]
Hunt, Ryan W. [3 ]
Davis, Ryan E. [1 ]
机构
[1] Natl Renewable Energy Lab, Catalyt Carbon Transformat & Scale Ctr, 15013 Denver West Pkwy, Golden, CO 80401 USA
[2] Sandia Natl Labs, Biomass Sci & Convers Technol, Livermore, CA 94550 USA
[3] Algix, 5168 Water Tower Rd, Meridian, MS 39301 USA
来源
关键词
Techno-economic assessment; Microalgae; High-protein; Conversion; Biofuels; Bioproducts; BIOFUEL PRODUCTION; LIFE-CYCLE; FLASH HYDROLYSIS; HIGHER ALCOHOLS; CULTIVATION; BIOMASS; PATHWAYS; DESIGN; WASTE; FEED;
D O I
10.1186/s13068-021-02098-3
中图分类号
Q81 [生物工程学(生物技术)]; Q93 [微生物学];
学科分类号
071005 ; 0836 ; 090102 ; 100705 ;
摘要
BackgroundMicroalgae possess numerous advantages for use as a feedstock in producing renewable fuels and products, with techno-economic analysis (TEA) frequently used to highlight the economic potential and technical challenges of utilizing this biomass in a biorefinery context. However, many historical TEA studies have focused on the conversion of biomass with elevated levels of carbohydrates and lipids and lower levels of protein, incurring substantial burdens on the ability to achieve high cultivation productivity rates relative to nutrient-replete, high-protein biomass. Given a strong dependence of algal biomass production costs on cultivation productivity, further TEA assessment is needed to understand the economic potential for utilizing potentially lower-cost but lower-quality, high-protein microalgae for biorefinery conversion.ResultsIn this work, we conduct rigorous TEA modeling to assess the economic viability of two conceptual technology pathways for processing proteinaceous algae into a suite of fuels and products. One approach, termed mild oxidative treatment and upgrading (MOTU), makes use of a series of thermo-catalytic operations to upgrade solubilized proteins and carbohydrates to hydrocarbon fuels, while another alternative focuses on the biological conversion of those substrates to oxygenated fuels in the form of mixed alcohols (MA). Both pathways rely on the production of polyurethanes from unsaturated fatty acids and valorization of unconverted solids for use as a material for synthesizing bioplastics. The assessment found similar, albeit slightly higher fuel yields and lower costs for the MA pathway, translating to a residual solids selling price of $899/ton for MA versus $1033/ton for MOTU as would be required to support a $2.50/gallon gasoline equivalent (GGE) fuel selling price. A variation of the MA pathway including subsequent upgrading of the mixed alcohols to hydrocarbon fuels (MAU) reflected a required solids selling price of $975/ton.ConclusionThe slight advantages observed for the MA pathway are partially attributed to a boundary that stops at oxygenated fuels versus fungible drop-in hydrocarbon fuels through a more complex MOTU configuration, with more comparable results obtained for the MAU scenario. In either case, it was shown that an integrated algal biorefinery can be economical through optimal strategies to utilize and valorize all fractions of the biomass.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Techno-economic assessment for the production of algal fuels and value-added products: opportunities for high-protein microalgae conversion
    Matthew Wiatrowski
    Bruno C. Klein
    Ryan W. Davis
    Carlos Quiroz-Arita
    Eric C. D. Tan
    Ryan W. Hunt
    Ryan E. Davis
    Biotechnology for Biofuels and Bioproducts, 15
  • [2] Techno-economic evaluation of wine lees refining for the production of value-added products
    Dimou, Charalampia
    Vlysidis, Anestis
    Kopsahelis, Nikolaos
    Papanikolaou, Seraphim
    Koutinas, Apostolis A.
    Kookos, Ioannis K.
    BIOCHEMICAL ENGINEERING JOURNAL, 2016, 116 : 157 - 165
  • [3] Techno-economic analysis of a microalgae-based biorefinery network for biofuels and value-added products
    Figueroa-Torres, Gonzalo M.
    Theodoropoulos, Constantinos
    BIORESOURCE TECHNOLOGY REPORTS, 2023, 23
  • [4] Techno-Economic Evaluation of Food Waste Fermentation for Value-Added Products
    Muhammad, Noor Intan Shafinas
    Rosentrater, Kurt A.
    ENERGIES, 2020, 13 (02)
  • [5] Conversion of oil palm waste into value-added products through pyrolysis: a sensitivity and techno-economic investigation
    Prakash Parthasarathy
    Mohammad Alherbawi
    Muhammad Shahbaz
    Hamish R. Mackey
    Gordon McKay
    Tareq Al-Ansari
    Biomass Conversion and Biorefinery, 2024, 14 : 9667 - 9687
  • [6] Conversion of oil palm waste into value-added products through pyrolysis: a sensitivity and techno-economic investigation
    Parthasarathy, Prakash
    Alherbawi, Mohammad
    Shahbaz, Muhammad
    Mackey, Hamish R.
    McKay, Gordon
    Al-Ansari, Tareq
    BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (08) : 9667 - 9687
  • [7] Chicken feather thermal decomposition analysis and techno-economic assessment for production of value-added products: a pilot plant study
    Munagala, Chandan Kumar
    Kathula, Naresh
    Razak, Syed M. D.
    Kesari, Aman Kumar
    Nagar, Harsha
    Bojja, Sreedhar
    Aniya, Vineet
    BIOMASS CONVERSION AND BIOREFINERY, 2022, 14 (21) : 27647 - 27670
  • [8] Microalgae as a Feedstock for Biofuel Precursors and Value-Added Products: Green Fuels and Golden Opportunities
    Tang, Yuting
    Rosenberg, Julian N.
    Bohutskyi, Pavlo
    Yu, Geng
    Betenbaugh, Michael J.
    Wang, Fei
    BIORESOURCES, 2016, 11 (01): : 2850 - 2885
  • [9] A Techno-Economic Assessment Of Biofuels Production By Microalgae
    Marzocchella, A.
    Andreozzi, R.
    Bartalini, G.
    Filippone, E.
    Olivieri, G.
    Pinto, G.
    Salatino, P.
    IBIC2010: 2ND INTERNATIONAL CONFERENCE ON INDUSTRIAL BIOTECHNOLOGY, 2010, 20 : 169 - 174
  • [10] Techno-economic evaluation of a process for the transformation of VitAto sweet potato into value-added products
    Mokhtar, Mohd Noriznan
    JOURNAL OF FOOD PROCESS ENGINEERING, 2022, 45 (08)