Influence of HRWR molecular weight and polydispersity on rheology and compressive strength of high-performance cement paste

被引：8
作者：
Adjou, Naima [1 ,2 ,4 ]
Yahia, Ammar [2 ]
Oudjit, Mohamed Nadjib [1 ]
Dupuis, Mario [3 ]
机构：
[1] Univ Sci & Technol Houari Boumediene, Fac Civil Engn, Algiers, Algeria
[2] Univ Sherbrooke, Dept Civil Engn, 2500 Blvd Univ, Sherbrooke, PQ, Canada
[3] Ruetgers Polymers Ltd, 120 Blvd Ind, Candiac, PQ, Canada
[4] Univ Sherbrooke, 2500 Blvd Univ, Sherbrooke, PQ, Canada
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2022年 / 327卷
关键词：
Cement paste; Polydispersity; High-range water reducer; Rheology; Molecular weight; Degree of polymerization; Strength development; RANGE WATER-REDUCER; SUPERPLASTICIZERS; BEHAVIOR; DESIGN; MODELS; GROUTS;
D O I：
10.1016/j.conbuildmat.2022.126980
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This study's objective is to investigate the effect of the molecular weight (Mw) and polydispersity of different high-range water reducer (HRWR) types on the rheology and strength development of high-performance cement paste. Polynaphthalene sulphonates (PNS) and polycarboxylate (PCE) HRWR types with molecular weights ranging from 11,857 to 31,232 Da were investigated. The interactions between HRWR and cement particles were evaluated in terms of hydration kinetics, flow curves, viscoelastic properties, as well as compressive strength development. The investigated mixtures were proportioned with water-to-cement ratios (w/c) of 0.35 and 0.42. The obtained results showed that 0.35 w/c mixtures with a high molecular weight and low polydispersity index HRWR exhibited greater dispersing ability and compressive strength development but lower build-up kinetics. For a given HRWR type, the ideal Mw to ensure the best rheological performance and strength development is identified.
引用
收藏
页数：12
相关论文
共 45 条
[1]  
Aitcin P.-C., 2001, B LAB PONTS CHAUSSEE
[2]   THE EFFECT OF SUPERPLASTICIZER MOLECULAR-WEIGHT ON ITS ADSORPTION ON, AND DISPERSION OF, CEMENT [J].
ANDERSEN, PJ ;
ROY, DM ;
GAIDIS, JM .
CEMENT AND CONCRETE RESEARCH, 1988, 18 (06) :980-986
[3]  
ASTM, 2019, D6910D6910M19 ASTM I, DOI [10.1520/D6910_D6910M-09, DOI 10.1520/D6910_D6910M-09]
[4]  
ASTM International, 2019, C1738C1738M19 ASTM I
[5]  
Billberg P., 2006, (Ph.D thesis)
[6]  
Buch Andressa Cristhy, 2018, ASTM C150/C150M-18, V633, P1173, DOI [10.1016/j.scitotenv.2018.03.280, DOI 10.1520/C0150_C0150M-18]
[7]  
Chetana J., 2013, International Journal of Pavement Research and Technology, V6, P192
[8]  
Helmuth R., 1995, Research Development Information
[9]  
Jordan G., 2001, PERFORMANCE BASED MA, V5
[10]  
Kantro: D.L., 1980, Cem. Concr. Aggregates, V2, P95, DOI [10.1520/ CCA10190J, 10.1520/CCA10190J, DOI 10.1520/CCA10190J]
12345