Wear-rate uncertainty analysis

被引：88

作者：

Schmitz, TL ^{[1
]}

Action, JE ^{[1
]}

Burris, DL ^{[1
]}

Ziegert, JC ^{[1
]}

Sawyer, WG ^{[1
]}

机构：

[1] Univ Florida, Dept Mech & Aerosp Engn, Gainesville, FL 32611 USA

来源：

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2004年 / 126卷 / 04期

关键词：

D O I：

10.1115/1.1792675

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Wear due to relative motion between component surfaces is one of the primary modes of failure for many engineered systems. Unfortunately, it is difficult to. accurately predict component life due to wear as reported wear rates generally exhibit large scatter This paper analyzes a reciprocating tribometer in an attempt to understand the instrument-related sources of the scatter in measured wear rates. To accomplish this, an uncertainty analysis is completed for wear-rate testing of a commercially available virgin polytetrafluoroethylene pin on 34 7 stainless steel counterface. It is found that, for the conditions selected in this study, the variance in the experimental data can be traced primarily to the experimental apparatus and procedure. Namely, the principal uncertainty sources were found to be associated with the sample mass measurement and volume determination.

引用

页码：802 / 808

页数：7

共 7 条

[1] CONTACT AND RUBBING OF FLAT SURFACES
ARCHARD, JF
[J]. JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) : 981 - 988
[2] Bevington P., 2002, Data Reduction and Error Analysis for the Physical Sciences, V3rd ed.
[3] Hazelrigg G.A., 1996, SYSTEMS ENG APPROACH
[4] International Organization for Standardization, 1993, GUID EXPR UNC MEAS
[5] WEAR MODELS AND PREDICTIVE EQUATIONS - THEIR FORM AND CONTENT
MENG, HC
LUDEMA, KC
[J]. WEAR, 1995, 181 : 443 - 457
[6] Displacement uncertainty in interferometric radius measurements
Schmitz, TL
Evans, CJ
Davies, A
Estler, WT
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) : 451 - 454
[7] Taylor B. N., 1994, 1297 NIST

← 1 →