Three-objective optimization of a mixed-flow pump impeller for improved suction performance and efficiency

In this article, design optimization was carried out to improve the suction performance and efficiency of a mixed-flow pump impeller. Commercial computational fluid dynamics code and a response surface method were used in the optimization to design a mixed-flow pump impeller. When it comes to a mixed-flow pump, the two main research objectives namely efficiency and suction performance tend to contradict. It is very important that the design technology improves the suction performance while maintaining high efficiency. Meridional plane and vane plane development variables were defined in the design of the impeller. The meridional plane expresses the shapes and sizes of the blades, while the vane plane development describes the impeller inlet and outlet angles as well as the blade angle distribution. The blade angle distribution of the impeller was designed using the traditional method by which inlet and outlet angles are connected smoothly. The surface response method was applied to the design variables of the impeller inlet part in this design optimization because they influence the performance of the mixed-flow pump. Objective functions were set to satisfy the total head at the design flow rate as well as to improve efficiency and suction performance. Design variables of the impeller inlet part of the mixed-flow pump and the changes in performance were analyzed in order to produce the optimal shape. The performance of the optimally designed shape was verified by numerical analysis, and the reliability of the test result was checked by comparative analysis against the reference model.