共 22 条
Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites
被引:60
作者:
Suriani, M. J.
[1
,2
]
Radzi, Fathin Sakinah Mohd
[1
]
Ilyas, R. A.
[3
,4
]
Petru, Michal
[5
]
Sapuan, S. M.
[6
,7
]
Ruzaidi, C. M.
[1
,2
]
机构:
[1] Univ Malaysia Terengganu, Fac Ocean Engn Technol & Informat, Terengganu 21030, Malaysia
[2] Univ Malaysia Terengganu, Fac Ocean Engn Technol & Informat, Marine Mat Res Grp, Terengganu 21030, Malaysia
[3] Univ Teknol Malaysia, Sch Chem & Energy Engn, Fac Engn, Utm Johor Bahru 81310, Johor, Malaysia
[4] Univ Teknol Malaysia, Ctr Adv Composite Mat, Utm Johor Bahru 81310, Johor, Malaysia
[5] Tech Univ Liberec, Inst Nanomat Adv Technol & Innovat, Studentska 2, Liberec 46117, Czech Republic
[6] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod INTROP, Lab Biocomposite Technol, Upm Serdang 43400, Selangor, Malaysia
[7] Univ Putra Malaysia, Dept Mech & Mfg Engn, Adv Engn Mat & Composites Res Ctr AEMC, Upm Serdang 43400, Selangor, Malaysia
来源:
关键词:
OPEFB composite;
flammability;
fire retardant;
hybrid composite;
tensile;
morphology;
pet yarn;
epoxy;
NATURAL FIBER;
MECHANICAL-PROPERTIES;
RESINS;
D O I:
10.3390/polym13081282
中图分类号:
O63 [高分子化学(高聚物)];
学科分类号:
070305 ;
080501 ;
081704 ;
摘要:
Oil palm empty fruit bunches (OPEFB) fiber is a natural fiber that possesses many advantages, such as biodegradability, eco-friendly, and renewable nature. The effect of the OPEFB fiber loading reinforced fire retardant epoxy composites on flammability and tensile properties of the polymer biocomposites were investigated. The tests were carried out with four parameters, which were specimen A (constant), specimen B (20% of fiber), specimen C (35% of fiber), and specimen D (50% of fiber). The PET yarn and magnesium hydroxide were used as the reinforcement material and fire retardant agent, respectively. The results were obtained from several tests, which were the horizontal burning test, tensile test, and scanning electron microscopy (SEM). The result for the burning test showed that specimen B exhibited better flammability properties, which had the lowest average burning rate (11.47 mm/min). From the tensile strength, specimen A revealed the highest value of 10.79 N/mm(2). For the SEM morphological test, increasing defects on the surface ruptured were observed that resulted in decreased tensile properties of the composites. It can be summarized that the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites were reduced when the fiber volume contents were increased at the optimal loading of 20%, with the values of 11.47 mm/min and 4.29 KPa, respectively.
引用
收藏
页数:18
相关论文