Ni nanocomposite films formed by Ni nanowires embedded in Ni matrix using electrodeposition

被引:5
|
作者
Zhou Zhao-feng [1 ,2 ]
Pan Yong [1 ,2 ]
Lei Wei-xin [1 ,2 ]
机构
[1] Xiangtan Univ, Fac Mat Optoelect & Phys, Xiangtan 411105, Peoples R China
[2] Xiangtan Univ, Minist Educ, Key Lab Low Dimens Mat & Applicat Technol, Xiangtan 411105, Peoples R China
基金
中国国家自然科学基金;
关键词
nickel nanowire; composite film; electrodeposition; corrosion resistance; COMPOSITE COATINGS; CORROSION BEHAVIOR; CARBON NANOTUBES; GRAIN-SIZE; NICKEL; DEPOSITION; MICROSTRUCTURE; NANOPARTICLES; CODEPOSITION; RESISTANCE;
D O I
10.1016/S1003-6326(09)60191-6
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Ni nanocomposite films formed by Ni nanowires embedded in Ni matrix (Ni nanowire/Ni composite films) were fabricated by electrodeposition combined with supersonic stirring in a conventional Watts' bath containing Ni nanowires with diameter about 30 nm. The deposition temperature-dependent microstructure, crystal orientation, lattice constant and corrosion behavior of the Ni nanowire/Ni composite films were investigated by field emission scanning electron microscope, X-ray diffraction and potentiodynamic polarization tests, respectively. And the possible mechanism was discussed. It is found that to some extent, the deposition temperature has an impact on the microstructure, crystal orientation, lattice constant and corrosion property of the Ni nanowire/Ni composite films. The Ni nanowire/Ni composite films prepared at 50 degrees C exhibit a novel inter-twisted-nanowire microstructure and have the best corrosion resistance.
引用
收藏
页码:637 / 642
页数:6
相关论文
共 50 条
  • [31] Effects of pulse electrodeposition parameters on the properties of Ni-TiO2 nanocomposite coatings
    Lajevardi, S. A.
    Shahrabi, T.
    APPLIED SURFACE SCIENCE, 2010, 256 (22) : 6775 - 6781
  • [32] Effect of the plating parameters on the electrodeposition of Ni matrix coatings containing Ti nanoparticles
    Lekka, M.
    Offoiach, R.
    Revelant, F.
    Fedrizzi, L.
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2019, 97 (02): : 73 - 81
  • [33] Alkaline Electrodeposition of Ni-ZnO Nanocomposite Coatings: Effects of Pulse Electroplating Parameters
    Sajjadnejad, M.
    Setoudeh, N.
    Mozafari, A.
    Isazadeh, A.
    Omidvar, H.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (06) : 1533 - 1541
  • [34] The electrodeposition and properties of Zn-Ni + Ni composite coatings
    Katarzyna Wykpis
    Jolanta Niedbała
    Magdalena Popczyk
    Antoni Budniok
    Eugeniusz Łagiewka
    Russian Journal of Electrochemistry, 2012, 48 : 1123 - 1129
  • [35] Nanostructure and texture of Ni and Ni/SiC nanocomposite coatings
    Ari-Gur, P
    Alogab, K
    Alamr, A
    Alkhasawneh, H
    Mirmiran, S
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2005, 24-25 : 619 - 622
  • [36] Effect of electrodeposition conditions on hardness of Ni-B/diamond composite films
    Ogihara, Hitoshi
    Safuan, Mohd
    Saji, Tetsuo
    SURFACE & COATINGS TECHNOLOGY, 2012, 212 : 180 - 184
  • [37] Analysis and modelling of the dry-sliding friction and wear behaviour of electrodeposited Ni and Ni-matrix-nanocomposite films
    Miguel, F. L.
    Mueller, R.
    Rosenkranz, A.
    Mathur, S.
    Muecklich, F.
    WEAR, 2016, 346 : 87 - 98
  • [38] Electrodeposition of Ni/Ni(OH)2 Catalytic Films for the Hydrogen Evolution Reaction Produced by using Cyclic Voltammetry
    Yuan, Hao
    Lunt, Richard R.
    Thompson, Joseph I.
    Ofoli, Robert Y.
    CHEMELECTROCHEM, 2017, 4 (02): : 241 - 245
  • [39] Electrodeposition of Ni-GNS-TiO2 nanocomposite coatings as anticorrosion film for mild steel in neutral environment
    Khalil, M. W.
    Eldin, Taher A. Salah
    Hassan, H. B.
    El-Sayed, Kh.
    Hamid, Z. Abdel
    SURFACE & COATINGS TECHNOLOGY, 2015, 275 : 98 - 111
  • [40] Effect of TMAB and ZrC concentration on mechanical and morphological properties of Ni-B/ZrC composite electrodeposition
    Hukumdar, Omer
    Kumlu, Umut
    Keskin, Ali
    Akar, Mustafa A.
    MATERIALS TESTING, 2025, 67 (01) : 17 - 35