CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

被引：10

作者：

Li, Yao ^{[2
]}

Si, Haiqing ^{[2
]}

Qiu, Jingxuan ^{[2
]}

Shen, Yingying ^{[2
]}

Zhang, Peihong ^{[1
]}

Jia, Hongyin ^{[1
]}

机构：

[1] China Aerodynam Res & Dev Ctr, Mianyang 621000, Sichuan, Peoples R China

[2] Nanjing Univ Aeronaut & Astronaut, Coll Civil Aviat & Flight, Nanjing 211106, Peoples R China

来源：

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING | 2021年 / 19卷 / 05期

关键词：

heat and mass transfer; numerical simulation; phase transition; plate bundle; plate-fin heat exchanger; TRANSFER COEFFICIENTS;

D O I：

10.1515/ijcre-2020-0219

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The plate-fin heat exchanger has been widely applied in the field of air separation and aerospace due to its high specific surface area of heat transfer. However, the low heat transfer efficiency of its plate bundles has also attracted more attention. It is of great significance to optimize the structure of plate-fin heat exchanger to improve its heat transfer efficiency. The plate bundle was studied by combining numerical simulation with experiment. Firstly, according to the heat and mass transfer theory, the plate bundle calculation model of plate-fin heat exchanger was established, and the accuracy of the UDF (User-Defined Functions) for describing the mass and heat transfer was verified. Then, the influences of fin structure parameters on the heat and mass transfer characteristics of channel were discussed, including the height, spacing, thickness and length of fins. Finally the influence of various factors on the flow field performance under different flow states was integrated to complete the optimal design of the plate bundle.

引用

页码：499 / 513

页数：15

共 28 条

[21]

Webb RalphL., 1994, PRINCIPLES ENHANCED

[22] Multi-Objective Optimization of Serrated Fin in Plate-Fin Heat Exchanger by Fluid Structure Interaction [J].

Wen J. ;

Li K. ;

Liu Y. ;

Wu M. ;

Wang S. ;

Li Y. .

Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2018, 52 (02) :130-135

[23]

[文键 Wen Jian], 2012, [化学工程, Chemical Engineering], V40, P25

[24] Analysis of the Fin Performance of Offset Strip Fins Used in Plate-Fin Heat Exchangers [J].

Yang, Yujie ;

Li, Yanzhong ;

Si, Biao ;

Zheng, Jieyu ;

Kang, Rui .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2016, 138 (10)

[25]

Zhang J. Y., 2015, CRYOGENIC ENG, V1, P8

[26]

Zhu C. L., 2010, POPULAR SCI TECHNOLO, V126, P123

[27]

[祝银海 ZHU Yinhai], 2006, [化工学报, Journal of Chemical Industry and Engineering (China)], V57, P1102

[28] Passivity-based impact and force control of a pneumatic actuator [J].

Zhu, Yong ;

Barth, Eric J. .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2008, 130 (02) :0245011-0245017

← 1 2 3 →