Influence of austenite grain size on overaging treatment of continuous annealed dual phase steels

被引：2
作者：
Garcia-Junceda, A.
Caballero, F. G.
Iung, T.
Capdevila, C.
de Andres, C. Garcia
机构：
[1] CSIC, Ctr Nacl Invest Met, Dept Met Phys, Solid Solid Transformat Grp MATERALIA, E-28040 Madrid, Spain
[2] Arcelor Res, F-57214 Maizerez Les Metz, France
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2007年 / 23卷 / 06期
关键词：
dual phase steel; continuous annealing; austenite grain size; overaging;
D O I：
10.1179/174328407X179557
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A dual phase steel with an initial coarse microstructure was refined, by means of a thermal treatment, to study the influence of the austenite grain size reached during an intercritical annealing treatment on the martensite start temperature. Thus, the effect of the austenite grain size on a subsequent overaging treatment was also investigated. It was found that a coarser austenite grain size leads to a higher martensite start temperature and a lower amount of non-tempered martensite and/or austenite (MA constituents) volume fraction after a continuous annealing and overaging treatment. The non-tempered martensite and/or austenite volume fraction always was higher for the highest overaging temperature.
引用
收藏
页码：671 / 676
页数：6
相关论文
共 21 条
  • [1] ALBUTT KJ, 1966, J IRON STEEL I, V204, P1217
  • [2] ANDREWS KW, 1965, J IRON STEEL I, V203, P721
  • [3] ON THE EFFECT OF FINE-GRAIN SIZE ON THE MS TEMPERATURE IN FE-27NI-0.025C ALLOYS
    BROFMAN, PJ
    ANSELL, GS
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (09): : 1929 - 1931
  • [4] Evolution of microstructural banding during the manufacturing process of dual phase steels
    Caballero, Francisca G.
    Garcia-Junceda, Andrea
    Capdevila, Carlos
    de Andres, Carlos Garcia
    [J]. MATERIALS TRANSACTIONS, 2006, 47 (09) : 2269 - 2276
  • [5] Analysis of effect of alloying elements on martensite start temperature of steels
    Capdevila, C
    Caballero, FG
    de Andrés, CG
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (05) : 581 - 586
  • [6] Carapella L.A., 1944, MET PROG, V46, P108
  • [7] Application of dilatometric analysis to the study of solid-solid phase transformations in steels
    de Andrés, CG
    Caballero, FG
    Capdevila, C
    Alvarez, LF
    [J]. MATERIALS CHARACTERIZATION, 2002, 48 (01) : 101 - 111
  • [8] Effects of tempering temperature on tensile and hole expansion properties of a C-Mn steel
    Fang, X
    Fan, Z
    Ralph, B
    Evans, P
    Underhill, R
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 132 (1-3) : 215 - 218
  • [9] GRANGE RA, 1946, T AM I MIN MET ENG, V167, P467
  • [10] GRENINGER AB, 1944, T AM SOC MET, V33, P537
123