Sensor Application Using Longitudinal Mode of Screen-Printed PZT Cantilever

被引:8
|
作者
Castille, C. [1 ]
Dufour, I. [1 ]
Maglione, M. [2 ]
Debeda, H. [1 ]
Pellet, C. [1 ]
Lucat, C. [1 ]
机构
[1] Univ Bordeaux, CNRS, UMR 5218, Lab IMS, F-33405 Talence, France
[2] Univ Bordeaux, ICMCB, CNRS, F-33608 Pessac, France
来源
关键词
Cantilever; Gas Detection; Self-Actuated piezoelectric; Thick-film; MICROCANTILEVERS; LAYER;
D O I
10.1016/j.proche.2009.07.242
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
High gas sensitivity, expected when using the unusual longitudinal vibration mode of PZT cantilever for such application, is based on its higher resonant frequency when compared to transversal bending mode. For this purpose, a new PZT cantilever structure has been fabricated with thick-film technology based on the sacrificial layer method. This structure is well adapted to generate the 31's longitudinal vibration. Studies of the composition and microstructure of Au/PZT/Au beam show the harmlessness of the process. Advantage of the 31's longitudinal mode for gas detection is confirmed by the values of resonant frequency and good quality factor for a 8x2x0.08 mm(3) PZT based cantilever. Indeed, taking a 0.1Hz frequency resolution for the second 31 mode, the limit of detection of 6 ppm toluene is reached with a 44 mu m PEUT coating.
引用
收藏
页码:971 / +
页数:2
相关论文
共 50 条
  • [41] Highly Concentrated, Conductive, Defect-free Graphene Ink for Screen-Printed Sensor Application
    Kim, Dong Seok
    Jeong, Jae-Min
    Park, Hong Jun
    Kim, Yeong Kyun
    Lee, Kyoung G.
    Choi, Bong Gill
    NANO-MICRO LETTERS, 2021, 13 (01)
  • [42] A piezo-mechanical characterization of PZT thick films screen-printed on alumina substrate
    Walter, V
    Delobelle, P
    Le Moal, P
    Joseph, E
    Collet, M
    SENSORS AND ACTUATORS A-PHYSICAL, 2002, 96 (2-3) : 157 - 166
  • [43] A nonlinear electromechanical model for ferroelectric materials: Application to soft-PZT thick films screen-printed on alumina substrate
    Walter, V
    Delobelle, P
    Le Moal, P
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2003, 50 (05) : 471 - 480
  • [44] THE APPLICATION FOR PZT THIN FILM IN THE TAPPING MODE SPM CANTILEVER
    Sun, Xiao-Song
    Liu, An-Ping
    Yao, Xing-Xing
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2013, 27 (15):
  • [45] Use of the longitudinal mode of screen-printed piezoelectric cantilevers coated with PEUT for toluene detection: Comparison with silicon cantilevers
    Debeda, H.
    Lakhmi, R.
    Lucat, C.
    Dufour, I.
    SENSORS AND ACTUATORS B-CHEMICAL, 2013, 187 : 198 - 203
  • [46] Improving Definition of Screen-Printed Functional Materials for Sensing Application
    Campos-Arias, Lia
    Perinka, Nikola
    Lau, Yin Cheung
    Castro, Nelson
    Pereira, Nelson
    Correia, Vitor Manuel Gomes
    Costa, Pedro
    Vilas-Vilela, Jose Luis
    Lanceros-Mendez, Senentxu
    ACS APPLIED ELECTRONIC MATERIALS, 2024, 6 (04) : 2152 - 2160
  • [47] Screen-printed biosensors using different alcohol oxidases
    Patel, NG
    Meier, S
    Cammann, K
    Chemnitius, GC
    SENSORS AND ACTUATORS B-CHEMICAL, 2001, 75 (1-2) : 101 - 110
  • [48] Printable Electrochemical Biosensors: A Focus on Screen-Printed Electrodes and Their Application
    Yamanaka, Keiichiro
    Vestergaard, Mun'delanji C.
    Tamiya, Eiichi
    SENSORS, 2016, 16 (10)
  • [49] Organophosphate Pesticides Sensor using Copper Oxide Nanorods Modified on Screen-Printed Carbon Electrodes
    Bulpakdi, P.
    Dhanasomboon, P.
    Sungkobol, S.
    Thanachayanont, C.
    Pungetmongkol, P.
    2022 IEEE 22ND INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY (NANO), 2022, : 500 - 503
  • [50] Paper-based amperometric sensor for determination of acetylcholinesterase using screen-printed graphene electrode
    Panraksa, Yosita
    Siangproh, Weena
    Khampieng, Thitikan
    Chailapakul, Orawon
    Apilux, Amara
    TALANTA, 2018, 178 : 1017 - 1023